|
User manual for Radial Engineering H-AMP Headphone Driver R800 8020
- Manufacturer: Radial Engineering
- Basic description and contents of package
- Product classification: Pro Audio - Recording - Headphone Amplifiers
- Safety instructions
- Startup and operation of the headphone amplifiers
- Tips for setting up your Radial Engineering
- Settings and expert assistance
- Contact Radial Engineering service
- Troubleshooting
- Warranty information
- Price: 200 USD
|
We recommend checking out our discussion threads on the Radial Engineering H-AMP Headphone Driver R800 8020,
which address similar problems with connecting and setting up Headphone Amplifiers Radial Engineering.
|
User manual for the Radial Engineering H-AMP Headphone Driver R800 8020
The user manual for the Radial Engineering H-AMP Headphone Driver R800 8020 provides
necessary instructions for the proper use of the product Pro Audio - Recording - Headphone Amplifiers.
The Radial Engineering H-AMP Passive Headphone Driver is a device that converts the high-level output of a power amplifier or amplified speaker into a signal that is suitable for headphones. It is useful for situations when you want to set up one or more separate headphone mixes from a PA system, such as from active powered speakers, passive speakers connected to an amplifier, or straight from an amplifier.
For connecting headphones to the interface, the unit includes two headphone outputs, one with a 1/4" TRS connector, the other with a selectable 1/4" TRS or 1/8" TRS connector. This allows you to use both large over-the-ear headphones and smaller in-ear monitors or ear buds. Both headphone outputs have a Level control and LED indicators to display signal presence and peak level. For connecting the PA system to the headphone interface, the device includes a Neutrik Speakon 4-pole input connector and a Neutrik Speakon 4-pole pass Thru. The pass Thru enables you to connect up to four H-AMP headphone interfaces together to expand the number of available headphones.
The unit also includes Low, Mid, and High fixed-cut frequency filters for adjusting the signal to suit different types of headphones and mixes. A Phone-2 Bypass button on the side allows you to assign the EQ filter to only the second headphone output. This is useful when you want to provide two separate sets of headphones with two separate mixes from one H-AMP headphone interface.
|
If you own a Radial Engineering headphone amplifiers and have a user manual in electronic form,
you can upload it to this website using the link on the right side of the screen.
You can upload and download the manual for the Radial Engineering H-AMP Headphone Driver R800 8020 in the following formats:
- *.pdf, *.doc, *.txt, *.jpg - Other formats are unfortunately not supported.
|
Additional parameters of the Radial Engineering H-AMP Headphone Driver R800 8020:
Circuit | Passive, mono with variable level control | Input | 1 x Speakon NL4FC - full-range speaker level Pin +1 = speaker positive Pin -1 = speaker negative | Maximum Input | 400 watts RMS | Maximum Source Impedance | 80 Ω typical minimum | Headphone Outputs | 2 x 1/4" (6.35 mm) TRS 1 x 1/8" (3.5 mm) TRS Mono with variable level control | Output Impedance | 8 to 600 Ω headphones | Attenuation | -28 dB with 40 Ω headphones | LED INDICATORS | Signal present and peak overload | Filter | High-, Mid-, and Low-cut frequency filters | Power Requirements | No power required | Construction | 14-gauge steel chassis with baked enamel finish outer shell | Dimensions (WxLxD) | 3.3 x 5.0 x 2" (84 x 127 x 48 mm) | Weight | 1.55 lb (720 g) | Package Weight | 1.85 lb | Box Dimensions (LxWxH) | 6.5 x 4.3 x 3.0" | |
The user manual for the Radial Engineering H-AMP Headphone Driver R800 8020 can be downloaded in .pdf
format if it did not come with your new headphone amplifiers, although the seller is
required to supply one. It is also quite common that customers throw out
the user manual with the box, or put the CD away somewhere and then can’t find it.
That’s why we and other Radial Engineering users keep a unique electronic library
for Radial Engineering headphone amplifierss,
where you can use our link to download the user manual for the Radial Engineering H-AMP Headphone Driver R800 8020.
The user manual lists all of the functions of the Radial Engineering H-AMP Headphone Driver R800 8020,
all the basic and advanced features and tells you how to use the headphone amplifiers.
The manual also provides troubleshooting for common problems. Even greater
detail is provided by the service manual, which is not typically shipped with the product,
but which can often be downloaded from Radial Engineering service.
If you want to help expand our database, you can upload a link to this website
to download a user manual or service manual, ideally in .pdf format. These pages
are created by you – users of the Radial Engineering H-AMP Headphone Driver R800 8020. User manuals are also
available on the Radial Engineering website under Pro Audio - Recording - Headphone Amplifiers.
Question and answer discussion forum concerning user instructions and resolving problems with the Radial Engineering H-AMP Headphone Driver R800 8020 - no comments have been made yet - be the first to add a comment
Post new comment/question/response regarding the Radial Engineering H-AMP Headphone Driver R800 8020
|
|
|
|
|