User manual for Radial Engineering Radial Submix 4x1 Line Mixer R700 0170
- Manufacturer: Radial Engineering
- Basic description and contents of package
- Product classification: Pro Audio - Recording - Analog Utility Mixers
- Safety instructions
- Startup and operation of the analog utility mixers
- Tips for setting up your Radial Engineering
- Settings and expert assistance
- Contact Radial Engineering service
- Troubleshooting
- Warranty information
- Price: 300 USD
|
We recommend checking out our discussion threads on the Radial Engineering Radial Submix 4x1 Line Mixer R700 0170,
which address similar problems with connecting and setting up Analog Utility Mixers Radial Engineering.
|
User manual for the Radial Engineering Radial Submix 4x1 Line Mixer R700 0170
The user manual for the Radial Engineering Radial Submix 4x1 Line Mixer R700 0170 provides
necessary instructions for the proper use of the product Pro Audio - Recording - Analog Utility Mixers.
Radial Engineering's Radial Submix 4x1 Line Mixer for Keyboards/500 Series Racks is an ultra quiet 4x1 mixer module designed to fit the 500 series format and enable the studio engineer to combine multiple audio stems such as line level devices and effects together and route them as needed. The Submix is also suited for keyboards, samplers and drum machines where these need to be mixed into the audio chain.
There are four 1/4" unbalanced inputs on the front panel. Separate level controls for each input are clearly designated for easy manipulation. These are equipped with dual-gang Accustate circuits that simultaneously set the input sensitivity and the gain to maximize signal-to-noise. This enables both instrument and line level signals to easily be interfaced without the need for a typical level reducing pad. The Submix employs a traditional virtual-earth mix-buss circuit topology. This delivers quiet performance even when several Submix modules are combined via the Omniport mix-buss input.
The single-space Submix may be used alone, or doubled-up for full stereo operation. When used with a 3-slot Radial Powerstrip, you can assemble a 12x1 keyboard mixer for live use. With a Workhorse, you can build a 32x2 analog summing mixer or combine various modules to create unique multi-band effects.
The Submix is a 500 series module designed to handle four sources and mix them via a series of four front panel controls. Because the Submix does not incorporate effects or equalization, it is very quiet and behaves well within its -10 dB to +12 dB working range. The Submix delivers great audio with less than 0.002% distortion at all frequencies.
|
If you own a Radial Engineering analog utility mixers and have a user manual in electronic form,
you can upload it to this website using the link on the right side of the screen.
You can upload and download the manual for the Radial Engineering Radial Submix 4x1 Line Mixer R700 0170 in the following formats:
- *.pdf, *.doc, *.txt, *.jpg - Other formats are unfortunately not supported.
|
Additional parameters of the Radial Engineering Radial Submix 4x1 Line Mixer R700 0170:
Circuit Type | Op-Amp with Accustate Gain Control | Frequency Response | 20 Hz-20 kHz | Phase Response | <8° @ 20 Hz | Maximum Input | +12 dBu | Maximum Output | +16 dBu | THD + N | <0.005% | Dynamic Range | 97 dB | Equivalent Input Noise | -103 dBu | Intermodulation Distortion | <0.006% | Pad | Auto Padding Input | Function | Omniport: Expansion Input for Buss | Output | XLR Output Configuration: Pin 1: GND Pin 2: + Pin 3: - | Power Requirements | +/-16 V @ 31 mA | Weight | 1.5 lb (0.7 kg) | Package Weight | 1.7 lb | Box Dimensions (LxWxH) | 8.9 x 6.8 x 2.0" | |
The user manual for the Radial Engineering Radial Submix 4x1 Line Mixer R700 0170 can be downloaded in .pdf
format if it did not come with your new analog utility mixers, although the seller is
required to supply one. It is also quite common that customers throw out
the user manual with the box, or put the CD away somewhere and then can’t find it.
That’s why we and other Radial Engineering users keep a unique electronic library
for Radial Engineering analog utility mixerss,
where you can use our link to download the user manual for the Radial Engineering Radial Submix 4x1 Line Mixer R700 0170.
The user manual lists all of the functions of the Radial Engineering Radial Submix 4x1 Line Mixer R700 0170,
all the basic and advanced features and tells you how to use the analog utility mixers.
The manual also provides troubleshooting for common problems. Even greater
detail is provided by the service manual, which is not typically shipped with the product,
but which can often be downloaded from Radial Engineering service.
If you want to help expand our database, you can upload a link to this website
to download a user manual or service manual, ideally in .pdf format. These pages
are created by you – users of the Radial Engineering Radial Submix 4x1 Line Mixer R700 0170. User manuals are also
available on the Radial Engineering website under Pro Audio - Recording - Analog Utility Mixers.
Question and answer discussion forum concerning user instructions and resolving problems with the Radial Engineering Radial Submix 4x1 Line Mixer R700 0170 - no comments have been made yet - be the first to add a comment
Post new comment/question/response regarding the Radial Engineering Radial Submix 4x1 Line Mixer R700 0170
|
|