|
User manual for Rane EXP5x Input Expander for the HAL1x (1RU) EXP5X
- Manufacturer: Rane
- Basic description and contents of package
- Product classification: Pro Audio - Installation Sound - System Processors
- Safety instructions
- Startup and operation of the system processors
- Tips for setting up your Rane
- Settings and expert assistance
- Contact Rane service
- Troubleshooting
- Warranty information
|
We recommend checking out our discussion threads on the Rane EXP5x Input Expander for the HAL1x (1RU) EXP5X,
which address similar problems with connecting and setting up System Processors Rane.
|
User manual for the Rane EXP5x Input Expander for the HAL1x (1RU) EXP5X
The user manual for the Rane EXP5x Input Expander for the HAL1x (1RU) EXP5X provides
necessary instructions for the proper use of the product Pro Audio - Installation Sound - System Processors.
The 1RU EXP5x from Rane is a 12 mic/line/line-plus Input & DSP Expander for the HAL1x. It supplies four DR (digital remote) ports, which are useful for adding source selection and/or volume control remote controls. Each of the 12 inputs independently supports either dynamic microphone, 48V phantom microphone, +4 dBu line-level, or Rane's line-plus summing input. Line-plus accepts -10 dBV unbalanced left/right summed into mono together on the "+" and "-" ports, respectively. For stereo unbalanced sources, line-plus allows connecting the stereo RCA left tip conductor to the "+" terminal, the RCA right tip to the "-" terminal, and both RCA shields to the EXP5x Euroblock ground. Line-plus can be selected in Halogen to get a properly summed mono audio channel.
|
If you own a Rane system processors and have a user manual in electronic form,
you can upload it to this website using the link on the right side of the screen.
You can upload and download the manual for the Rane EXP5x Input Expander for the HAL1x (1RU) EXP5X in the following formats:
- *.pdf, *.doc, *.txt, *.jpg - Other formats are unfortunately not supported.
|
Additional parameters of the Rane EXP5x Input Expander for the HAL1x (1RU) EXP5X:
Connectors | 12 x 6-pin 5 mm pitch Euroblock, balanced Microphone/Line input 2 x RJ-45, DR (digital remote) Port | ADC | 24 bit, 48 kHz | Line Input | Line Input: 4 Vrms / 12 dBV, minimum at 1 kHz Line-Plus Input (L+R Mono): 4 Vrms / 12 dBV, minimum at 1 kHz, Line-plus summing of left and right | Microphone Input | Condenser Mic Input: 500 mVrms / -6 dBV, minimum at 1 kHz, 48 V phantom power Dynamic Mic Input: 127 mVrms / -18 dBV, minimum at 1 kHz | Dynamic Range | 101 dB typ. A-weighted | Frequency Response | 20 Hz to 20 kHz, +0.1 / -0.3 dB +4 dBu, unity gain, 10 kΩ load | Input Impedance | 5.8 kΩ / 2.9 kΩ, typical balance / each leg at 1 kHz | Isolation Between Channels | > 100 dB, typical at 1 kHz | CMRR | 55 dB, minimum at 1 kHz | Indicators | Signal Indicators: -50 dBFS, green LED Overload Indicators: -0.5 dBFS, red LED | Propagation Delay | 758 µs, analog in to expansion bus | Cable Length | DR (Digital Remote): 1000' (300 m) | Power | DR (Digital Remote): 24 VDC @ 50 mA | Wiring | Class 2 | Ambient Temperature | 113° F (45° C) maximum | Power Requirement | 100 to 240 VAC | Approvals and Compliance | CE, FCC, CCSAUS | Dimensions (H x W x D) | 1.75 x 19.0 x 8.25" (4.4 x 48.3 x 20.9 cm) | Weight | 4.6 lb (2.1 kg) | Package Weight | 7.5 lb | Box Dimensions (LxWxH) | 20.5 x 13.6 x 4.3" | |
The user manual for the Rane EXP5x Input Expander for the HAL1x (1RU) EXP5X can be downloaded in .pdf
format if it did not come with your new system processors, although the seller is
required to supply one. It is also quite common that customers throw out
the user manual with the box, or put the CD away somewhere and then can’t find it.
That’s why we and other Rane users keep a unique electronic library
for Rane system processorss,
where you can use our link to download the user manual for the Rane EXP5x Input Expander for the HAL1x (1RU) EXP5X.
The user manual lists all of the functions of the Rane EXP5x Input Expander for the HAL1x (1RU) EXP5X,
all the basic and advanced features and tells you how to use the system processors.
The manual also provides troubleshooting for common problems. Even greater
detail is provided by the service manual, which is not typically shipped with the product,
but which can often be downloaded from Rane service.
If you want to help expand our database, you can upload a link to this website
to download a user manual or service manual, ideally in .pdf format. These pages
are created by you – users of the Rane EXP5x Input Expander for the HAL1x (1RU) EXP5X. User manuals are also
available on the Rane website under Pro Audio - Installation Sound - System Processors.
Question and answer discussion forum concerning user instructions and resolving problems with the Rane EXP5x Input Expander for the HAL1x (1RU) EXP5X - no comments have been made yet - be the first to add a comment
Post new comment/question/response regarding the Rane EXP5x Input Expander for the HAL1x (1RU) EXP5X
|
|
|
|
|