|
User manual for RDL DS-TPS2A Active Dual Pair RJ45 Sender Module DS-TPS2A
- Manufacturer: RDL
- Basic description and contents of package
- Product classification: Pro Audio - Installation Sound - Modules & Cards
- Safety instructions
- Startup and operation of the modules & cards
- Tips for setting up your RDL
- Settings and expert assistance
- Contact RDL service
- Troubleshooting
- Warranty information
- Price: 137 USD
|
We recommend checking out our discussion threads on the RDL DS-TPS2A Active Dual Pair RJ45 Sender Module DS-TPS2A,
which address similar problems with connecting and setting up Modules & Cards RDL.
|
User manual for the RDL DS-TPS2A Active Dual Pair RJ45 Sender Module DS-TPS2A
The user manual for the RDL DS-TPS2A Active Dual Pair RJ45 Sender Module DS-TPS2A provides
necessary instructions for the proper use of the product Pro Audio - Installation Sound - Modules & Cards.
The DS-TPS2A Active Dual Pair RJ45 Sender Module from RDL is a two-pair audio sending module compatible with RDL Format-A twisted pair products. The DS-TPS2A is constructed of stainless steel to coordinate with RDL Decora-style stainless steel remote controls in commercial/industrial installations. The DS-TPS2A module features two RCA phono jack inputs, one for the left channel source and one for the right channel source. These inputs are designed to receive standard -10 dBV consumer level signals. The input signals are amplified using studio-quality pre-amplifiers optimized for normal operating levels. The buffered left and right inputs are routed to output cable pairs B and C.
This module drives only two cable pairs, therefore it accept a signal and power from one microphone-level or line-level Format-A single-pair sender. This unit has a second RJ45 jack for an input cable. One single-pair sender may be chained with the DS-TPS2A. A single-pair sender must be set to feed pair A if it is connected together with the DS-TPS2A. The power pair and all three audio pairs are fed through both rear-panel RJ45 jacks.
The DS-TPS2A can be powered directly from a 24 VDC power supply using the detachable terminal block. Local power connected to the module is also fed to all connected remote modules. The DS-TPS2A may be remotely powered through the twisted pair cable from any other module, signal distributor or RDL power inserter connected to the same twisted pair cable. Module power is indicated by a front-panel LED. The DS-TPS2A is designed to be mounted in wall boxes, cabinets or other enclosures that allow users to connect audio sources. The DS-TPS2A can mount in RDL WB-1U and WB-2U wall boxes, or in standard U.S. electrical boxes.
|
If you own a RDL modules & cards and have a user manual in electronic form,
you can upload it to this website using the link on the right side of the screen.
You can upload and download the manual for the RDL DS-TPS2A Active Dual Pair RJ45 Sender Module DS-TPS2A in the following formats:
- *.pdf, *.doc, *.txt, *.jpg - Other formats are unfortunately not supported.
|
Additional parameters of the RDL DS-TPS2A Active Dual Pair RJ45 Sender Module DS-TPS2A:
| Input Connections | RCA phono, 10 kOhms, unbalanced
Format B (Left); C (Right) Format A Input: RJ45 | | Output | RDL TP Format-A | | Output Connections | RJ45 | | Frequency Response | 20 Hz to 50 kHz (± 0.5 dB) | | THD & Noise | < 0.05% (20 Hz to 50 kHz)
<0.005% (1 kHz) | | Noise | Below +4 dBu: < -95 dB | | Crosstalk | < 90 dB (1 kHz)
< 75 dB (20 Hz to 20 kHz) | | Headroom | Above +4 dBu: > 18 dB | | LED Indicator | Power In, blue | | Power Connections | 2 x RJ45; Detachable terminal block | | Power Requirements | 24 VDC @ 65 mA plus connected loads | | Ambient Operating Environment | 32 to 131°F (0 to 55°C) | | Minimum Depth | Mounting Box Minimum Depth: 2.4" (6.1 cm) | | Dimensions (WxHxD) | 1.6 x 4.11 x 1.89" (4.8 x 4.06 x 4.8 cm) | | Weight | 0.24 lb (0.11 kg) | | Package Weight | 0.4 lb | | Box Dimensions (LxWxH) | 4.8 x 4.3 x 2.2" | |
The user manual for the RDL DS-TPS2A Active Dual Pair RJ45 Sender Module DS-TPS2A can be downloaded in .pdf
format if it did not come with your new modules & cards, although the seller is
required to supply one. It is also quite common that customers throw out
the user manual with the box, or put the CD away somewhere and then can’t find it.
That’s why we and other RDL users keep a unique electronic library
for RDL modules & cardss,
where you can use our link to download the user manual for the RDL DS-TPS2A Active Dual Pair RJ45 Sender Module DS-TPS2A.
The user manual lists all of the functions of the RDL DS-TPS2A Active Dual Pair RJ45 Sender Module DS-TPS2A,
all the basic and advanced features and tells you how to use the modules & cards.
The manual also provides troubleshooting for common problems. Even greater
detail is provided by the service manual, which is not typically shipped with the product,
but which can often be downloaded from RDL service.
If you want to help expand our database, you can upload a link to this website
to download a user manual or service manual, ideally in .pdf format. These pages
are created by you – users of the RDL DS-TPS2A Active Dual Pair RJ45 Sender Module DS-TPS2A. User manuals are also
available on the RDL website under Pro Audio - Installation Sound - Modules & Cards.
Question and answer discussion forum concerning user instructions and resolving problems with the RDL DS-TPS2A Active Dual Pair RJ45 Sender Module DS-TPS2A - no comments have been made yet - be the first to add a comment
Post new comment/question/response regarding the RDL DS-TPS2A Active Dual Pair RJ45 Sender Module DS-TPS2A
|
|
|
|
|
