|
User manual for RDL FP-MR2 Message Repeater FP-MR2
- Manufacturer: RDL
- Basic description and contents of package
- Product classification: Pro Audio - Installation Sound - Message Announcers & Alerts
- Safety instructions
- Startup and operation of the message announcers & alerts
- Tips for setting up your RDL
- Settings and expert assistance
- Contact RDL service
- Troubleshooting
- Warranty information
- Price: 270 USD
|
We recommend checking out our discussion threads on the RDL FP-MR2 Message Repeater FP-MR2,
which address similar problems with connecting and setting up Message Announcers & Alerts RDL.
|
User manual for the RDL FP-MR2 Message Repeater FP-MR2
The user manual for the RDL FP-MR2 Message Repeater FP-MR2 provides
necessary instructions for the proper use of the product Pro Audio - Installation Sound - Message Announcers & Alerts.
The RDL FP-MR2 Message Repeater permits electronic storage of a single recording of up to a duration of 1 minute 40 seconds. This recorded message may be played back manually using an external contact closure to ground or using the front-panel start button. The message may also be played back periodically using the interval timer included in the FP-MR2 Message Repeater. A balanced line-level music input allows background music to be connected and the associated input potentiometer allows the installer to set the music level. When message playback is triggered, the music is faded down. At the conclusion of the message, the music level fades back up. A front-panel DIP switch sets the music to fade under the message (-20 dB nominal) or completely off (used for messages containing music). The module output level is a nominal +4 dBu balanced. The output level is indicated on an RDL dual-LED VU meter which is used to set the proper music and recording levels. The message may be recorded once, at installation, and then played back repeatedly. The message may be re-recorded at any time and is retained when power is removed from the module. The recording input is a standard -10 dBV consumer level, unbalanced phono jack. An input level trimmer is provided to set the correct recording level which is indicated on the dual LED meter. The front-panel record enable push-button erases the message in memory and enables recording, indicated by the record enable LED. The module begins recording when the start button is pushed and continues until the button is released. The REC LED is illuminated during recording. An integral audio compressor maintains a consistent average recording level over 20 dB input of level variation without significant audible effect on the signal dynamics.
|
If you own a RDL message announcers & alerts and have a user manual in electronic form,
you can upload it to this website using the link on the right side of the screen.
You can upload and download the manual for the RDL FP-MR2 Message Repeater FP-MR2 in the following formats:
- *.pdf, *.doc, *.txt, *.jpg - Other formats are unfortunately not supported.
|
Additional parameters of the RDL FP-MR2 Message Repeater FP-MR2:
Input | 10 kΩ unbalanced | Input Level | -20 to 0 dBV | Frequency Response | 80 Hz to 12 kHz (±1.5 dB) | Noise | Below +4 dBu: < -65 dB | Input | 50 kΩ balanced or unbalanced | Input Level | For +4 dBu out: -18 dBu balanced (-20 dBV unbalanced) to +18 dBu balanced (+16 dBV unbalanced) | Frequency Response | 30 Hz to 40 kHz (±1 dB) | THD + N | < 0.05% (1 kHz) | Noise | Below +4 dBu: < -70 dB (unity gain) | CMRR | >70 dB (50 to 150 Hz) | Output | 150 Ω balanced or 75 Ω unbalanced | Output Level | +4 dBu nominal | Control Input | 2 x TRIG and DISABLE, Pull to ground, 1 mA | Control Output | 2 x PLAYING and EOM, Open-collector @ 25 mA | Power Requirement | 24 VDC @ 60 mA, Ground-referenced | Operating Environment | 32 to 131°F (0 to 55°C) | Dimensions | 1.36 x 3.25 x 5.00" (3.46 x 8.26 x 12.70 cm) | Package Weight | 0.85 lb | Box Dimensions (LxWxH) | 7.2 x 5.1 x 2.4" | |
The user manual for the RDL FP-MR2 Message Repeater FP-MR2 can be downloaded in .pdf
format if it did not come with your new message announcers & alerts, although the seller is
required to supply one. It is also quite common that customers throw out
the user manual with the box, or put the CD away somewhere and then can’t find it.
That’s why we and other RDL users keep a unique electronic library
for RDL message announcers & alertss,
where you can use our link to download the user manual for the RDL FP-MR2 Message Repeater FP-MR2.
The user manual lists all of the functions of the RDL FP-MR2 Message Repeater FP-MR2,
all the basic and advanced features and tells you how to use the message announcers & alerts.
The manual also provides troubleshooting for common problems. Even greater
detail is provided by the service manual, which is not typically shipped with the product,
but which can often be downloaded from RDL service.
If you want to help expand our database, you can upload a link to this website
to download a user manual or service manual, ideally in .pdf format. These pages
are created by you – users of the RDL FP-MR2 Message Repeater FP-MR2. User manuals are also
available on the RDL website under Pro Audio - Installation Sound - Message Announcers & Alerts.
Question and answer discussion forum concerning user instructions and resolving problems with the RDL FP-MR2 Message Repeater FP-MR2 - no comments have been made yet - be the first to add a comment
Post new comment/question/response regarding the RDL FP-MR2 Message Repeater FP-MR2
|
|
|
|
|