|
User manual for RDL HR-MCP2 - Dual Microphone Compressor HR-MCP2
- Manufacturer: RDL
- Basic description and contents of package
- Product classification: Pro Audio - Recording - Dynamics Processors
- Safety instructions
- Startup and operation of the dynamics processors
- Tips for setting up your RDL
- Settings and expert assistance
- Contact RDL service
- Troubleshooting
- Warranty information
- Price: 448 USD
|
We recommend checking out our discussion threads on the RDL HR-MCP2 - Dual Microphone Compressor HR-MCP2,
which address similar problems with connecting and setting up Dynamics Processors RDL.
|
User manual for the RDL HR-MCP2 - Dual Microphone Compressor HR-MCP2
The user manual for the RDL HR-MCP2 - Dual Microphone Compressor HR-MCP2 provides
necessary instructions for the proper use of the product Pro Audio - Recording - Dynamics Processors.
RDL's HR-MCP2 Dual Microphone Compressor provides excellent input headroom and a transparent frequency response while keeping crosstalk and distortion well below the noise floor. Rear-panel switches allow you to choose whether each channel will operate as a mic-pre or as a studio quality compressor. Also included is a 48 Vdc phantom power option which ensures that the HR-MCP2 is compatible with both condenser and dynamic microphones.
|
If you own a RDL dynamics processors and have a user manual in electronic form,
you can upload it to this website using the link on the right side of the screen.
You can upload and download the manual for the RDL HR-MCP2 - Dual Microphone Compressor HR-MCP2 in the following formats:
- *.pdf, *.doc, *.txt, *.jpg - Other formats are unfortunately not supported.
|
Additional parameters of the RDL HR-MCP2 - Dual Microphone Compressor HR-MCP2:
| Inputs | XLR (2, 3 pin, rear panel,1=GND, 2+, 3-)
detachable terminal block (2) | | Input Level | -60 to -20 dBu (without input pad)
-45 to -5 dBu (with input pad) | | Maximum Input Level | > +5 dBu (input pad disabled)
+22 dBu (input pad enabled) | | Input Impedance | > 1.5 kΩ balanced | | Phantom Power | Selectable 48 V phantom | | Input Pad Switch | 15 dB nominal (1 per input channel) | | Outputs | XLR (2, 3 pin, rear panel,1=GND, 2+, 3-)
detachable terminal block (2) | | Output Level | Mic: -45 dBu (nominal, into 600 Ohms)
Line: +4 dBu balanced (nominal, dynamic audio source), +1 dBu balanced (nominal, sine-wave producing 3 dB compression) | | Output Impedance | 150 Ω balanced | | Channels | 2 (1 and 2; may be used for stereo or as two separate mono channels) | | Gain Range | 20 to 60 dB (line-level output; front panel adjustable; one for each channel) | | Frequency Response | 10 Hz to 25 kHz (+/- 0.5 dB, flat)
-3 dB @ 80 Hz (lowcut filter enabled) | | THD | Below noise floor (3 dB compression) | | CMRR | > 70 dB (50 Hz to 5 kHz) | | Residual Noise | < -85 dB (20 to 20 kHz, 40 dB gain, without compression, 150Ω source)
< -70 dB (20 to 20 kHz, 60 dB gain, without compression, 150Ω source) | | Crosstalk | Below noise floor | | Indicators | Power LED (blue)
Gain Reduction(7 per channel, yellow, 3, 6, 9, 12, 15, 18, 21 dB)
Clip (2, red) | | Power Requirement | 24 Vdc @ 200 mA (230 mA with phantom), Ground-referenced | | Mounting | Rack-mount using optional rack adapters such as HR-RA2; or operate free-standing (feet included) | | Dimensions | 1.7 x 8.6 x 4.59" / 4.3 x 20.6 x 11.66cm | | Package Weight | 2.65 lb | | Box Dimensions (LxWxH) | 10.3 x 7.3 x 2.4" | |
The user manual for the RDL HR-MCP2 - Dual Microphone Compressor HR-MCP2 can be downloaded in .pdf
format if it did not come with your new dynamics processors, although the seller is
required to supply one. It is also quite common that customers throw out
the user manual with the box, or put the CD away somewhere and then can’t find it.
That’s why we and other RDL users keep a unique electronic library
for RDL dynamics processorss,
where you can use our link to download the user manual for the RDL HR-MCP2 - Dual Microphone Compressor HR-MCP2.
The user manual lists all of the functions of the RDL HR-MCP2 - Dual Microphone Compressor HR-MCP2,
all the basic and advanced features and tells you how to use the dynamics processors.
The manual also provides troubleshooting for common problems. Even greater
detail is provided by the service manual, which is not typically shipped with the product,
but which can often be downloaded from RDL service.
If you want to help expand our database, you can upload a link to this website
to download a user manual or service manual, ideally in .pdf format. These pages
are created by you – users of the RDL HR-MCP2 - Dual Microphone Compressor HR-MCP2. User manuals are also
available on the RDL website under Pro Audio - Recording - Dynamics Processors.
Question and answer discussion forum concerning user instructions and resolving problems with the RDL HR-MCP2 - Dual Microphone Compressor HR-MCP2 - no comments have been made yet - be the first to add a comment
Post new comment/question/response regarding the RDL HR-MCP2 - Dual Microphone Compressor HR-MCP2
|
|
|
|
|
