User manual for RDL ST-SSR1 - Solid-State Audio Relay ST-SSR1
- Manufacturer: RDL
- Basic description and contents of package
- Product classification: Pro Audio - Installation Sound - Switchers & Controllers
- Safety instructions
- Startup and operation of the switchers & controllers
- Tips for setting up your RDL
- Settings and expert assistance
- Contact RDL service
- Troubleshooting
- Warranty information
- Price: 104 USD
|
We recommend checking out our discussion threads on the RDL ST-SSR1 - Solid-State Audio Relay ST-SSR1,
which address similar problems with connecting and setting up Switchers & Controllers RDL.
|
User manual for the RDL ST-SSR1 - Solid-State Audio Relay ST-SSR1
The user manual for the RDL ST-SSR1 - Solid-State Audio Relay ST-SSR1 provides
necessary instructions for the proper use of the product Pro Audio - Installation Sound - Switchers & Controllers.
The RDL ST-SSR1 offers absolutely silent switching between two line-level audio input signals. It may also be used as a silent on/off switch for a single channel. The ST-SSR1 can be programmed by the user for either fast or soft switching. The unit is built into an extremely compact housing for installation almost anywhere.
|
If you own a RDL switchers & controllers and have a user manual in electronic form,
you can upload it to this website using the link on the right side of the screen.
You can upload and download the manual for the RDL ST-SSR1 - Solid-State Audio Relay ST-SSR1 in the following formats:
- *.pdf, *.doc, *.txt, *.jpg - Other formats are unfortunately not supported.
|
Additional parameters of the RDL ST-SSR1 - Solid-State Audio Relay ST-SSR1:
Switching Time | Normal Off: 10 us (Fast) 5 ms (Soft) Normal On: 15 us (Fast) 70 ms (Soft) Select Off: 15 us (Fast) 10 ms (Soft) Select On: 20us (Fast) 35 ms (Soft) | Control Signal | "Trig" Terminal Must be Externally Pulled to Ground | Control Current | 0.5mA | THD + N | < 0.05% | Frequency Response | 10Hz to 23kHz (+/- 0.5dB, Bridging Load) 20Hz to 23kHz (+/- 0.5dB, 600 ohm Load) | Noise | < -80dB (85dB Typical) (Below +4 dBu) | Headroom | > 55dB (50 to 120Hz, Either Input) (Above +4 dBu) | On Gain | Unity (600 ohms Balanced Input/Output) | Off Attenuation | > 80dB (10Hz to 20kHz, Either Input) | Indicators | 2 x Active Input LEDs | Power Requirements | 24 to 33 VDC @ 40mA (Ground-Referenced) | Package Weight | 0.25 lb | Box Dimensions (LxWxH) | 4.1 x 2.1 x 2.1" | |
The user manual for the RDL ST-SSR1 - Solid-State Audio Relay ST-SSR1 can be downloaded in .pdf
format if it did not come with your new switchers & controllers, although the seller is
required to supply one. It is also quite common that customers throw out
the user manual with the box, or put the CD away somewhere and then can’t find it.
That’s why we and other RDL users keep a unique electronic library
for RDL switchers & controllerss,
where you can use our link to download the user manual for the RDL ST-SSR1 - Solid-State Audio Relay ST-SSR1.
The user manual lists all of the functions of the RDL ST-SSR1 - Solid-State Audio Relay ST-SSR1,
all the basic and advanced features and tells you how to use the switchers & controllers.
The manual also provides troubleshooting for common problems. Even greater
detail is provided by the service manual, which is not typically shipped with the product,
but which can often be downloaded from RDL service.
If you want to help expand our database, you can upload a link to this website
to download a user manual or service manual, ideally in .pdf format. These pages
are created by you – users of the RDL ST-SSR1 - Solid-State Audio Relay ST-SSR1. User manuals are also
available on the RDL website under Pro Audio - Installation Sound - Switchers & Controllers.
Question and answer discussion forum concerning user instructions and resolving problems with the RDL ST-SSR1 - Solid-State Audio Relay ST-SSR1 - no comments have been made yet - be the first to add a comment
Post new comment/question/response regarding the RDL ST-SSR1 - Solid-State Audio Relay ST-SSR1
|
|