|
User manual for Rode NT4 - Cardioid Studio Condenser X/Y Stereo Microphone
Overall Rating: 5.0
100% of respondents would recommend this to a friend.
- Manufacturer: Rode
- Basic description and contents of package
- Product classification:
- Safety instructions
- Startup and operation of the
- Tips for setting up your Rode
- Settings and expert assistance
- Contact Rode service
- Troubleshooting
- Warranty information
- Price: 529 USD
|
We recommend checking out our discussion threads on the Rode NT4 - Cardioid Studio Condenser X/Y Stereo Microphone,
which address similar problems with connecting and setting up Rode.
|
User manual for the Rode NT4 - Cardioid Studio Condenser X/Y Stereo Microphone
The user manual for the Rode NT4 - Cardioid Studio Condenser X/Y Stereo Microphone provides
necessary instructions for the proper use of the product .
The Rode NT4 is a stereo recording microphone featuring dual cardioid capsules mounted in a X/Y stereo configuration. The microphone is designed for field or studio use and provides transparent sound reproduction and accurate representation of signal within the "Left/Right" stereo field. This provides optimum results when capturing live performances, ambiance, instruments, choruses, choirs etc.
|
If you own a Rode and have a user manual in electronic form,
you can upload it to this website using the link on the right side of the screen.
You can upload and download the manual for the Rode NT4 - Cardioid Studio Condenser X/Y Stereo Microphone in the following formats:
- *.pdf, *.doc, *.txt, *.jpg - Other formats are unfortunately not supported.
|
Additional parameters of the Rode NT4 - Cardioid Studio Condenser X/Y Stereo Microphone:
| Transducer | 2 Externally Polarized Condensers in Stereo 'XY' Placement | | Polar Pattern | Stereo (Each Capsule is Cardioid) | | Frequency Response | 20Hz - 20kHz | | Dynamic Range (Typical) | > 128dB | | Signal-to-Noise Ratio | 78dB | | Maximum Input Sound Level | 143dB, (@ 1% THD into 1k) | | Power Requirements | 4mA, P48 (38v-52v) 2mA, P24 (20v-26v) 2.8mA, P12 (10.8v-13.2v) or 2.4mA using 9v Battery | | Output Impedance | 200 Ohms (per Side) | | Output Connectors | XLR-5M Type, (Terminates to 2 XLR-3M Connectors at End of Included Stereo Cable) | | Pad | None | | Low Frequency Roll-Off | None | | Dimensions | 9.28 x 1.28" (232 x 32mm) LxDdiameter | | Weight | 16.9 oz. (480g) | |
The user manual for the Rode NT4 - Cardioid Studio Condenser X/Y Stereo Microphone can be downloaded in .pdf
format if it did not come with your new , although the seller is
required to supply one. It is also quite common that customers throw out
the user manual with the box, or put the CD away somewhere and then can’t find it.
That’s why we and other Rode users keep a unique electronic library
for Rode s,
where you can use our link to download the user manual for the Rode NT4 - Cardioid Studio Condenser X/Y Stereo Microphone.
The user manual lists all of the functions of the Rode NT4 - Cardioid Studio Condenser X/Y Stereo Microphone,
all the basic and advanced features and tells you how to use the .
The manual also provides troubleshooting for common problems. Even greater
detail is provided by the service manual, which is not typically shipped with the product,
but which can often be downloaded from Rode service.
If you want to help expand our database, you can upload a link to this website
to download a user manual or service manual, ideally in .pdf format. These pages
are created by you – users of the Rode NT4 - Cardioid Studio Condenser X/Y Stereo Microphone. User manuals are also
available on the Rode website under .
Question and answer discussion forum concerning user instructions and resolving problems with the Rode NT4 - Cardioid Studio Condenser X/Y Stereo Microphone - no comments have been made yet - be the first to add a comment
Post new comment/question/response regarding the Rode NT4 - Cardioid Studio Condenser X/Y Stereo Microphone
|
|
|
|
|
Can't find what you're looking for? Try Google Search!
|
|
| Current discussions |
Most recently discussed products:
Wiring/configure 501n-3 for rear view switch - Rear View Safety RVS-501N 3-Channel Multiplexer RVS-501N
Posted by: Ron Diller
2025-05-06 23:25:57
Hello,I replaced the rv radio, which controls back,and turn signal cameras. How can I wire it to have the backup camera on all the time as a rear view mirror function, except when blinkers are on. Thanks! ...
Wiring/configure 501n-3 for rear view switch - Rear View Safety RVS-501N 3-Channel Multiplexer RVS-501N
Posted by: Ron Diller
2025-05-06 23:25:03
Hello,I replaced the rv radio, which controls back,and turn signal cameras. How can I wire it to have the backup camera on all the time as a rear view mirror function, except when blinkers are on. Thanks! ...
sony alpha 7II - Sony Alpha a7 II Mirrorless Digital Camera with 28-70mm Lens
Posted by: Clabue
2025-05-06 13:13:48
Alpha 7 II - Black + Sony FE 28-70mm f/3.5-5.6 OSS f/3.5-5.6
Where can I find a manual. It didn't come with the camera I just purchased online. Thank you....
FBA-Pioneer BDR-XU03 - Pioneer BDR-XU03 USB 3.0 BD/DVD/CD Burner BDR-XU03
Posted by: Mark Visel
2025-05-05 20:51:42
Sorry, but I am having one hell of a time finding this manual. Bought thru Amazon and am getting no where with finding manual. Can someone help....
SRD-92B setting - Fujinon SRD92B Zoom Rate Demand SRD-92B
Posted by: Matthew Allen
2025-05-04 14:10:30
How can we make the speed adjustment control slower... |
| Uploaded instruction manuals |
|
|
|
