|
User manual for SIIG Dual Port Gigabit Ethernet Server PCIe x4 CN-GP1111-S1
- Manufacturer: SIIG
- Basic description and contents of package
- Product classification: Computers & Solutions - Networking - Network Interface Cards & Adapters
- Safety instructions
- Startup and operation of the network interface cards & adapters
- Tips for setting up your SIIG
- Settings and expert assistance
- Contact SIIG service
- Troubleshooting
- Warranty information
- Price: 160 USD
|
We recommend checking out our discussion threads on the SIIG Dual Port Gigabit Ethernet Server PCIe x4 CN-GP1111-S1,
which address similar problems with connecting and setting up Network Interface Cards & Adapters SIIG.
|
User manual for the SIIG Dual Port Gigabit Ethernet Server PCIe x4 CN-GP1111-S1
The user manual for the SIIG Dual Port Gigabit Ethernet Server PCIe x4 CN-GP1111-S1 provides
necessary instructions for the proper use of the product Computers & Solutions - Networking - Network Interface Cards & Adapters.
The Dual Port Gigabit Ethernet Server PCIe x4 Network Card from SIIG enables you to add two Gigabit 10/100/1000 Mb/s Ethernet networking ports to your system via a PCIe slot. It supports 10/100/1000 Mb/s data rate auto-negotiation, and full duplex mode that doubles the network connection speed. This dual profile Ethernet adapter card can be installed in a standard or low profile computer chassis, with the included low profile bracket. It enhances the networking performance of your workstation, which comes either with 10/100 Ethernet, or without networking capabilities.
|
If you own a SIIG network interface cards & adapters and have a user manual in electronic form,
you can upload it to this website using the link on the right side of the screen.
You can upload and download the manual for the SIIG Dual Port Gigabit Ethernet Server PCIe x4 CN-GP1111-S1 in the following formats:
- *.pdf, *.doc, *.txt, *.jpg - Other formats are unfortunately not supported.
|
Additional parameters of the SIIG Dual Port Gigabit Ethernet Server PCIe x4 CN-GP1111-S1:
Chipset | Inteli350 | Interface | PCIe x4 (4-lane) | Compliance | PCIe specification revision 2.1 | Connector | 2 x RJ-45 female (8-pin) 2 x LED indicators | Data Transfer Rate | 10/100/1000 Mb/s | IEEE Standards | IEEE 802.3, IEEE 802.3u, IEEE 802.3ab, IEEE 802.3ad (link aggregation), IEEE 802.1Q (VLAN tagging) IEEE 802.3az Energy Efficient Ethernet (EEE) IEEE 802.1q Virtual Local Area Network (VLAN) support with VLAN tag insertion, stripping, and packet filtering | Support | PCI-SIG SR-IOV specification Integrated PHY for 10/100/1000 Mb/s for multispeed, full and half duplex TCP/UDP, IPv4 checksum offloads (Rx/Tx/Large-send) IPv6 support for IP/TCP and IP/UDP receive checksum offload Message Signal Interrupt Extension (MSI-X) UDP and TCP Transmit Segmentation Offloading (TSO) Preboot eXecution Environment (PXE) flash interface support Supports teaming, jumbo frame, and multiple teams Full Wake up Support: -Advanced Power Management (APM) (formerly Wake on LAN) -Advanced Configuration and Power Interface (ACPI) specification v2.0c -Magic packet wake-up enabled with unique MAC address | Certifications | FCC, CE, RoHS | Requirements | PCIe-enabled system with an available 4-lane (or higher) PCIe slot Windows 8 (32/64-bit)/7 (32/64-bit)/Vista (32/64-bit)/XP (32/64-bit)/Server 2003 & 2008 (32/64-bit)/Server 2008 R2/Server 2012 | Operating Temperature | 50 to 131°F (10 to 55°C) | Storage Temperature | 14 to 158°F (-10 to 70°C) | Relative Humidity | Operating 20 to 80% (non condensing) | Dimensions (WxHxD) | 5.39 x 4.72 x 0.79" (136.90 x 118.88 x 20.06 mm) | Weight | 0.18 lb (0.08 kg) | |
The user manual for the SIIG Dual Port Gigabit Ethernet Server PCIe x4 CN-GP1111-S1 can be downloaded in .pdf
format if it did not come with your new network interface cards & adapters, although the seller is
required to supply one. It is also quite common that customers throw out
the user manual with the box, or put the CD away somewhere and then can’t find it.
That’s why we and other SIIG users keep a unique electronic library
for SIIG network interface cards & adapterss,
where you can use our link to download the user manual for the SIIG Dual Port Gigabit Ethernet Server PCIe x4 CN-GP1111-S1.
The user manual lists all of the functions of the SIIG Dual Port Gigabit Ethernet Server PCIe x4 CN-GP1111-S1,
all the basic and advanced features and tells you how to use the network interface cards & adapters.
The manual also provides troubleshooting for common problems. Even greater
detail is provided by the service manual, which is not typically shipped with the product,
but which can often be downloaded from SIIG service.
If you want to help expand our database, you can upload a link to this website
to download a user manual or service manual, ideally in .pdf format. These pages
are created by you – users of the SIIG Dual Port Gigabit Ethernet Server PCIe x4 CN-GP1111-S1. User manuals are also
available on the SIIG website under Computers & Solutions - Networking - Network Interface Cards & Adapters.
Question and answer discussion forum concerning user instructions and resolving problems with the SIIG Dual Port Gigabit Ethernet Server PCIe x4 CN-GP1111-S1 - no comments have been made yet - be the first to add a comment
Post new comment/question/response regarding the SIIG Dual Port Gigabit Ethernet Server PCIe x4 CN-GP1111-S1
|
|
|
|
|