|
User manual for Supermicro X10SLA-F Server Motherboard MBD-X10SLA-F-O
- Manufacturer: Supermicro
- Basic description and contents of package
- Product classification: Computers & Solutions - Computer Components - Motherboards
- Safety instructions
- Startup and operation of the motherboards
- Tips for setting up your Supermicro
- Settings and expert assistance
- Contact Supermicro service
- Troubleshooting
- Warranty information
- Price: 200 USD
|
We recommend checking out our discussion threads on the Supermicro X10SLA-F Server Motherboard MBD-X10SLA-F-O,
which address similar problems with connecting and setting up Motherboards Supermicro.
|
User manual for the Supermicro X10SLA-F Server Motherboard MBD-X10SLA-F-O
The user manual for the Supermicro X10SLA-F Server Motherboard MBD-X10SLA-F-O provides
necessary instructions for the proper use of the product Computers & Solutions - Computer Components - Motherboards.
The X10SLA-F Server Motherboard from SuperMicro ATX form factor motherboard supports Intel Xeon E3-1200 v3, Core i3, Pentium, and Celeron Processors with its Intel C222 PCH chipset and LGA 1150 socket. It supports up to 32GB of memory and features one PCIe 3.0 slot, one PCIe 2.0 slot, and dual GbE LAN Ports via Intel i210AT. The motherboard also features integrated IPMI 2.0 with KVM and dedicated LAN, SATA DOM power connector, TPM header, and chassis intrusion detection/header.
|
If you own a Supermicro motherboards and have a user manual in electronic form,
you can upload it to this website using the link on the right side of the screen.
You can upload and download the manual for the Supermicro X10SLA-F Server Motherboard MBD-X10SLA-F-O in the following formats:
- *.pdf, *.doc, *.txt, *.jpg - Other formats are unfortunately not supported.
|
Additional parameters of the Supermicro X10SLA-F Server Motherboard MBD-X10SLA-F-O:
| CPU | Intel Xeon processor E3-1200 v3
Supports 4th Gen Core i3, Pentium, and Celeron processors
Single socket H3 (LGA 1150) | | Chipset | Intel C222 Express PCH | | Form Factor | ATX | | Capacity | 4 x 240-pins DDR3 DIMM sockets
Supports up to 32 GB DDR3 ECC Un-Buffered memory (UDIMM) | | Type | 1600 MHz ECC DDR3 SDRAM 72-bit
240-pins gold-plated DIMMs | | DIMM Sizes | 1/2/4/8 GB | | Voltage | 1.5 V | | Error Detection | Corrects single-bit errors
Detects double-bit errors (using ECC memory) | | SATA | SATA 3 (6 Gb/s) with RAID 0, 1
SATA 2 (3 Gb/s) with RAID 0, 1, 10, 5 | | IPMI | Support for intelligent platform management interface v.2.0
IPMI 2.0 with virtual media over LAN and KVM-over-LAN support
Aspeed AST2400 BMC | | Network Controllers | Intel i210AT
Virtual machine device queues high efficient I/O overhead
Supports 10BASE-T, 100BASE-TX, and 1000BASE-T
RJ-45 output
1 x Realtek RTL8211E PHY (dedicated IPMI) | | VGA | BMC integrated Aspeed AST2400 | | SATA | 2 x SATA 3 (6 Gb/s) ports
4 x SATA2 (3 Gb/s) ports | | LAN | 2 x Gigabit Ethernet LAN ports
1 x RJ-45 dedicated IPMI LAN port | | USB | 2 x USB 3.0 ports (1 x Type-A, 1 x via header)
6 x USB 2.0 ports (4 x rears, 2 x via header) | | VGA | 1 x VGA D-Sub connector | | Serial Port | 2 x COM ports (1 x rear, 1 x header) | | TPM | 1 x 1.2 TPM 20-pins header | | PCIe | 1 x PCIe 3.0 x16 slot
1 x PCIe 2.0 x4 (in x8) slot | | PCI | 5 x PCI-32 slots | | Type | 128 Mb SPI flash EEPROM with AMI BIOS | | Features | DMI (SMBIOS) 2.7
ACPI 5.0
Supports USB Keyboard | | Software | Supports IPMI (Intelligent Platform Management Interface) v1.5 / 2.0 with KVM
SuperDoctor III
Watch Dog
NMI | | Power Configurations | ACPI / APM power management
Main switch override mechanism
Power-on mode for AC power recovery | | Voltage | Monitors for CPU Cores, +12/3.3 V, 5V Standby, VBAT, memory, chipset voltages
3-Phase-switching voltage regulator with auto-sense from 1.5 -1.86 V | | Fan | Total of five 4-pin fan headers supporting up to 5 fans
5 x fans with tachometer status monitoring
Status monitor for speed control
Status monitor for on/off control
Support 3-pin fans (w/o speed control)
Low noise fan speed control
Pulse Width Modulated (PWM) fan connectors | | Temperature | Monitoring for CPU and chassis environment
CPU thermal trip support
FC temperature sensing logic
Supports Thermal Monitor 2 (TM2)
PECI | | LED | CPU / System Overheat LED
5 V Standby alert LED | | Other Features | Chassis intrusion detection/ header | | Dimensions | 12.0 x 9.6" (30.5 x 24.4 cm) | |
The user manual for the Supermicro X10SLA-F Server Motherboard MBD-X10SLA-F-O can be downloaded in .pdf
format if it did not come with your new motherboards, although the seller is
required to supply one. It is also quite common that customers throw out
the user manual with the box, or put the CD away somewhere and then can’t find it.
That’s why we and other Supermicro users keep a unique electronic library
for Supermicro motherboardss,
where you can use our link to download the user manual for the Supermicro X10SLA-F Server Motherboard MBD-X10SLA-F-O.
The user manual lists all of the functions of the Supermicro X10SLA-F Server Motherboard MBD-X10SLA-F-O,
all the basic and advanced features and tells you how to use the motherboards.
The manual also provides troubleshooting for common problems. Even greater
detail is provided by the service manual, which is not typically shipped with the product,
but which can often be downloaded from Supermicro service.
If you want to help expand our database, you can upload a link to this website
to download a user manual or service manual, ideally in .pdf format. These pages
are created by you – users of the Supermicro X10SLA-F Server Motherboard MBD-X10SLA-F-O. User manuals are also
available on the Supermicro website under Computers & Solutions - Computer Components - Motherboards.
Question and answer discussion forum concerning user instructions and resolving problems with the Supermicro X10SLA-F Server Motherboard MBD-X10SLA-F-O - no comments have been made yet - be the first to add a comment
Post new comment/question/response regarding the Supermicro X10SLA-F Server Motherboard MBD-X10SLA-F-O
|
|
|
|
|
