User manual Tascam CG-1800 - Video Sync/Master Clock Generator CG-1800
Operating instructions and pdf manual for use - Tascam CG-1800 - Video Sync/Master Clock Generator CG-1800 User manual, User manual Tascam CG-1800 - Video Sync/Master Clock Generator CG-1800, Tascam, CG-1800, Video, Sync/Master, Clock, Generator, C
User manual for Tascam CG-1800 - Video Sync/Master Clock Generator CG-1800
Startup and operation of the wordclock & syncronization
Tips for setting up your Tascam
Settings and expert assistance
Contact Tascam service
Troubleshooting
Warranty information
We recommend checking out our discussion threads on the Tascam CG-1800 - Video Sync/Master Clock Generator CG-1800,
which address similar problems with connecting and setting up WordClock & Syncronization Tascam.
User manual for the Tascam CG-1800 - Video Sync/Master Clock Generator CG-1800
The user manual for the Tascam CG-1800 - Video Sync/Master Clock Generator CG-1800 provides
necessary instructions for the proper use of the product Pro Audio - Computer Audio - WordClock & Syncronization.
The CG-1800 from Tascam is specifically designed for small to large-scale video/audio synchronization systems. An OCXO (oven-controlled crystal oscillator) is used for its high precision and because it's not affected by the temperature of the environment. With a clock frequency precision of 0.01 ppm the unit delivers high-precision synchronization with a frequency stability of +/-0.005 ppm or less per day.
External clock jitter is reduced using an original circuit design that incorporates a high-performance video clock generator engineered with a FPGA and a PLL (phase-locked loop) circuit with a discrete filter. This enables a stable clock signal to be provided to the video/word outputs, improving system stability.
In addition to twelve Wordclock outputs and four video outputs, the digital outputs include two AES3/AES11 and two S/PDIF outputs, making this unit useful for large-scale audio/video synchronization systems and a wide variety of other applications. Of the twelve Wordclock outputs, two also support x2 Fs, x4 Fs and 256 Fs output, enabling them to be used in systems with Pro Tools and other DAW software.
The unit features multiple functions to support maintenance and the identification of issues if problems occur, allowing the device to provide troubleshooting support. Additionally, a logging function enables issues to be listed, and saved to a CSV file format on a USB flash drive. A self-correction function allows users to conduct maintenance using an external signal input and simple operations.
Amphenol BNC connectors on the chassis use nuts for coupling for extra durability, along with a single circuit board used for each connector. This provides good resistance to the twisting and pulling of cables, and the suppression of interference between connectors.
If you own a Tascam wordclock & syncronization and have a user manual in electronic form,
you can upload it to this website using the link on the right side of the screen.
You can upload and download the manual for the Tascam CG-1800 - Video Sync/Master Clock Generator CG-1800 in the following formats:
*.pdf, *.doc, *.txt, *.jpg - Other formats are unfortunately not supported.
Additional parameters of the Tascam CG-1800 - Video Sync/Master Clock Generator CG-1800:
Specifications
Video Input
Connector BNC Input Level 0.5 Vp-p to 2.0 Vp-p Input Impedance 75 ohm (ON/OFF selectable by menu) Input Signal SD video black burst: NTSC (29.97), NTSC B/W (30), PAL (25) HD Video Tri-Level 720p: 50, 59.97, 60 1080p: 23.976, 24, 25, 29.97, 30, 59.94, 60 1080i/pfs: 23.976, 24, 25, 29.97, 30 Allowable Frequency Deviation: +/-10 ppm
Wordclock Input
Connector BNC Input Level 0.5 Vp-p to 5.0 Vp-p Input Impedance 75/50 ohm (75/50/OFF selectable by menu) Supported Frequencies Wordclock: 32, 44.1, 48, 88.2, 96, 176.4 and 192kHz ATOM: 10.0 MHz GPS: 10.0 MHz Allowable Frequency Deviation: +/-50 ppm
AES3/11 Input
Connector XLR-3-31(1:GND, 2:HOT, 3:COLD) Input Level 0.2Vp-p to 10Vp-p Input Impedance 110 ohm Format AES11-2003, AES3-2003, IEC60958-4 Supported Frequencies Wordclock: 32, 44.1, 48, 88.2, 96, 176.4 and 192kHz Allowable Frequency Deviation: +/-50 ppm
The user manual for the Tascam CG-1800 - Video Sync/Master Clock Generator CG-1800 can be downloaded in .pdf
format if it did not come with your new wordclock & syncronization, although the seller is
required to supply one. It is also quite common that customers throw out
the user manual with the box, or put the CD away somewhere and then can’t find it.
That’s why we and other Tascam users keep a unique electronic library
for Tascam wordclock & syncronizations,
where you can use our link to download the user manual for the Tascam CG-1800 - Video Sync/Master Clock Generator CG-1800.
The user manual lists all of the functions of the Tascam CG-1800 - Video Sync/Master Clock Generator CG-1800,
all the basic and advanced features and tells you how to use the wordclock & syncronization.
The manual also provides troubleshooting for common problems. Even greater
detail is provided by the service manual, which is not typically shipped with the product,
but which can often be downloaded from Tascam service.
If you want to help expand our database, you can upload a link to this website
to download a user manual or service manual, ideally in .pdf format. These pages
are created by you – users of the Tascam CG-1800 - Video Sync/Master Clock Generator CG-1800. User manuals are also
available on the Tascam website under Pro Audio - Computer Audio - WordClock & Syncronization.
Question and answer discussion forum concerning user instructions and resolving problems with the Tascam CG-1800 - Video Sync/Master Clock Generator CG-1800 - no comments have been made yet - be the first to add a comment
Question and answer discussion forum concerning user instructions and resolving problems with the Tascam CG-1800 - Video Sync/Master Clock Generator CG-1800 - no comments have been made yet - be the first to add a comment