|
User manual for Telecast Fiber Systems Rattler 4 Miniature RAT4-KIT1-T-MXLR
- Manufacturer: Telecast Fiber Systems
- Basic description and contents of package
- Product classification: Professional Video - Signal Processing & Distribution - Video Extenders & Repeaters
- Safety instructions
- Startup and operation of the video extenders & repeaters
- Tips for setting up your Telecast Fiber Systems
- Settings and expert assistance
- Contact Telecast Fiber Systems service
- Troubleshooting
- Warranty information
|
We recommend checking out our discussion threads on the Telecast Fiber Systems Rattler 4 Miniature RAT4-KIT1-T-MXLR,
which address similar problems with connecting and setting up Video Extenders & Repeaters Telecast Fiber Systems.
|
User manual for the Telecast Fiber Systems Rattler 4 Miniature RAT4-KIT1-T-MXLR
The user manual for the Telecast Fiber Systems Rattler 4 Miniature RAT4-KIT1-T-MXLR provides
necessary instructions for the proper use of the product Professional Video - Signal Processing & Distribution - Video Extenders & Repeaters.
The Rattler 4 Miniature Single Link Transmitter and Receiver over Fiber Kit from Telecast Fiber Systems consists of a transmitter, a receiver, two power supplies, and an injection-molded road case. The transmitter module accepts one 75Ω coaxial input and converts it into an optical stream via a standard ST connector. The receiver then reconverts the uncompressed signal back to a BNC output.
The transmitter features equalization for long lengths of coaxial cable, so you can use them at nearly any point in your HD-SDI chain. The receiver module automatically reclocks the incoming SMPTE standard signal at 270 Mbps, 1.5 Gbps, and 3 Gbps. Rattler 4 modules are inter-operable with industry standard optical HD-SDI signals to/from other Miranda equipment such as routers, DAs, and fiber converters from the Densité Series, NVISION routers, picoLink converters and the Telecast Series including Python, Telethon, and Terrapin products. They make it easy to expand the systems that you already have and create a wide variety of network topologies.
The units include LEDs to indicate Power ON, HD-SDI signal presence, and received optical power level (receiver unit). This provides critical system diagnostic information without the need of additional test equipment, such as optical power meters. The Rattlers can either use their own in-line power supplies or accept any DC voltage from 5 to 16V via a mini-XLR4 jack.
|
If you own a Telecast Fiber Systems video extenders & repeaters and have a user manual in electronic form,
you can upload it to this website using the link on the right side of the screen.
You can upload and download the manual for the Telecast Fiber Systems Rattler 4 Miniature RAT4-KIT1-T-MXLR in the following formats:
- *.pdf, *.doc, *.txt, *.jpg - Other formats are unfortunately not supported.
|
Additional parameters of the Telecast Fiber Systems Rattler 4 Miniature RAT4-KIT1-T-MXLR:
Transmission Method | Digital | Transmission Range | 12.5 - 31.1 mi (20 - 50 km) | Input Level | 800 mV p-p | Input Impedance | 75 Ω | Equalization | Coax. at 2.97 Gbps: 328.1' (100 m) | Output Impedance | 75 Ω | Bit Error Rate | At -22 dBm: 10 -11 | Jitter | <0.2 UI | Rise / Fall time | <120 ps | Operating Wavelength | 1310 nm | Transmitter Output | -7 dBm typical | Coaxial Inputs/Outputs | BNC | Optical Connector | ST | Receiver Sensitivity | -22 dBm | Single Link Range | Margin: 15 - 25 dB | Indicator LEDs | Power, signal, link, optical power | Operating Temperature | -13 to 131°F (-25 to 55°C) | Humidity | 0 to 95%, non-condensing | Power Consumption | 600 mW | Input Voltage | 5 - 16 VDC | Power Connector | Mini XLR (replaceable plug) | Dimensions (H x W x L) | Transmitter: 0.75 x 0.75 x 3.2" (1.9 x 1.9 x 8.1 cm) Receiver: 0.75 x 0.75 x 3.2" (1.9 x 1.9 x 8.1 cm) | Weight | Transmitter: 3 oz (85 g) Receiver: 3 oz (85 g) | Package Weight | 5.3 lb | Box Dimensions (LxWxH) | 12.2 x 9.0 x 5.9" | |
The user manual for the Telecast Fiber Systems Rattler 4 Miniature RAT4-KIT1-T-MXLR can be downloaded in .pdf
format if it did not come with your new video extenders & repeaters, although the seller is
required to supply one. It is also quite common that customers throw out
the user manual with the box, or put the CD away somewhere and then can’t find it.
That’s why we and other Telecast Fiber Systems users keep a unique electronic library
for Telecast Fiber Systems video extenders & repeaterss,
where you can use our link to download the user manual for the Telecast Fiber Systems Rattler 4 Miniature RAT4-KIT1-T-MXLR.
The user manual lists all of the functions of the Telecast Fiber Systems Rattler 4 Miniature RAT4-KIT1-T-MXLR,
all the basic and advanced features and tells you how to use the video extenders & repeaters.
The manual also provides troubleshooting for common problems. Even greater
detail is provided by the service manual, which is not typically shipped with the product,
but which can often be downloaded from Telecast Fiber Systems service.
If you want to help expand our database, you can upload a link to this website
to download a user manual or service manual, ideally in .pdf format. These pages
are created by you – users of the Telecast Fiber Systems Rattler 4 Miniature RAT4-KIT1-T-MXLR. User manuals are also
available on the Telecast Fiber Systems website under Professional Video - Signal Processing & Distribution - Video Extenders & Repeaters.
Question and answer discussion forum concerning user instructions and resolving problems with the Telecast Fiber Systems Rattler 4 Miniature RAT4-KIT1-T-MXLR - no comments have been made yet - be the first to add a comment
Post new comment/question/response regarding the Telecast Fiber Systems Rattler 4 Miniature RAT4-KIT1-T-MXLR
|
|
|
|
|