User manual for Telex BTR-300 - VHF Wireless Intercom Base Station F.01U.135.889
- Manufacturer: Telex
- Basic description and contents of package
- Product classification: Pro Audio - Location Sound - Base Stations
- Safety instructions
- Startup and operation of the base stations
- Tips for setting up your Telex
- Settings and expert assistance
- Contact Telex service
- Troubleshooting
- Warranty information
|
We recommend checking out our discussion threads on the Telex BTR-300 - VHF Wireless Intercom Base Station F.01U.135.889,
which address similar problems with connecting and setting up Base Stations Telex.
|
User manual for the Telex BTR-300 - VHF Wireless Intercom Base Station F.01U.135.889
The user manual for the Telex BTR-300 - VHF Wireless Intercom Base Station F.01U.135.889 provides
necessary instructions for the proper use of the product Pro Audio - Location Sound - Base Stations.
The Telex BTR-300 is a VHF wireless intercom Base Station, featuring simultaneous, full-duplex support of up to 4 remote stations and 16 beltpack transceivers, and features a 2000' (beltpack to beltpack) operating range. The higher VHF frequency allocation and advanced front-end RF filtering have been acquired and designed to avoid DTV operating bands and minimize localized RF interference on location.
|
If you own a Telex base stations and have a user manual in electronic form,
you can upload it to this website using the link on the right side of the screen.
You can upload and download the manual for the Telex BTR-300 - VHF Wireless Intercom Base Station F.01U.135.889 in the following formats:
- *.pdf, *.doc, *.txt, *.jpg - Other formats are unfortunately not supported.
|
Additional parameters of the Telex BTR-300 - VHF Wireless Intercom Base Station F.01U.135.889:
| System Modulation | FM | | Frequency Range | 150 - 216 MHz | | Operating Range | Up to 2000'(line of sight, beltpack to beltpack) | | Tuning | Crystal Controlled, 0.005% | | Power | 12 - 15 V AC/DC | | Battery Life | Not Applicable | | Charging Time | Not Applicable | | FCC License | Notification under FCC Part 15 | | Output | 50 mW Typical | | Deviation | 3 kHz | | Modular Distortion | <1% at Rated Output | | Sensitivity | <0.5 uV for 12 dB SINAD | | IF Bandwidth | Not Specified by Manufacturer | | Image Rejection | 65 dB or better | | Controls and Indicators | Front Panel:
1 x Power On/Off Switch
1 x Power On LED Indicator
1 x External Intercom Switch
1 x External Intercom Level Control
1 x External Intercom LED Indicator
1 x Auxiliary Audio Enable Switch
1 x Auxiliary Audio Level Control
1 x Auxiliary Audio LED Indicator
1 x Headset Mic On Switch
1 x Headset Volume Control Knob
1 x Local Push-to-Talk LED Indicator
1 x Local Microphone Gain Control
1 x Overmodulation LED Indicator
4 x Portable Transmit/Station Enable Switches
4 x Portable Enable LED Indicators
Rear Panel:
1 x 3-Position Transmit Switch
1 x Headset Microphone Select Switch
1 x External Speaker Volume Control | | Connectors | Front:
1 x 4-pin XLR Male Telex Headset Connector*
Rear:
2 x Color-Coded Transmit/Receive Antenna Connectors
1 x 3-pin XLR Female Auxiliary Input
1 x 3-pin XLR Male Auxiliary Output
1 x 3-pin XLR Female Intercom In
1 x 3-pin XLR Male Intercom Out
1 x 1/4" 8 Ohm External Speaker Out
1 x 12 V AC/DC Power In
*Also available with 4-pin XLR Female Connector for RTS Headsets | | Antenna | 2 x 5/8 Wave*
SO239 Connector on Chassis
*Transmit and Receive | | Dimensions | 15.75 x 1.75 x 10.5" (400 x 45 x 260mm) | | Weight | 4.5 lb (2 kg) | | Package Weight | 10.25 lb | | Box Dimensions (LxWxH) | 19.9 x 14.4 x 5.3" | |
The user manual for the Telex BTR-300 - VHF Wireless Intercom Base Station F.01U.135.889 can be downloaded in .pdf
format if it did not come with your new base stations, although the seller is
required to supply one. It is also quite common that customers throw out
the user manual with the box, or put the CD away somewhere and then can’t find it.
That’s why we and other Telex users keep a unique electronic library
for Telex base stationss,
where you can use our link to download the user manual for the Telex BTR-300 - VHF Wireless Intercom Base Station F.01U.135.889.
The user manual lists all of the functions of the Telex BTR-300 - VHF Wireless Intercom Base Station F.01U.135.889,
all the basic and advanced features and tells you how to use the base stations.
The manual also provides troubleshooting for common problems. Even greater
detail is provided by the service manual, which is not typically shipped with the product,
but which can often be downloaded from Telex service.
If you want to help expand our database, you can upload a link to this website
to download a user manual or service manual, ideally in .pdf format. These pages
are created by you – users of the Telex BTR-300 - VHF Wireless Intercom Base Station F.01U.135.889. User manuals are also
available on the Telex website under Pro Audio - Location Sound - Base Stations.
Question and answer discussion forum concerning user instructions and resolving problems with the Telex BTR-300 - VHF Wireless Intercom Base Station F.01U.135.889 - no comments have been made yet - be the first to add a comment
Post new comment/question/response regarding the Telex BTR-300 - VHF Wireless Intercom Base Station F.01U.135.889
|
|
