User manual Universal Audio Apollo 8p - Thunderbolt 2 Audio APOLLO 8P
Operating instructions and pdf manual for use - Universal Audio Apollo 8p - Thunderbolt 2 Audio APOLLO 8P User manual, User manual Universal Audio Apollo 8p - Thunderbolt 2 Audio APOLLO 8P, Universal, Audio, Apollo, 8p, Thunderbolt, 2, Audio, APOLL
User manual for Universal Audio Apollo 8p - Thunderbolt 2 Audio APOLLO 8P
Manufacturer: Universal Audio
Basic description and contents of package
Product classification: Pro Audio - Computer Audio - DSP Accelerators
Safety instructions
Startup and operation of the dsp accelerators
Tips for setting up your Universal Audio
Settings and expert assistance
Contact Universal Audio service
Troubleshooting
Warranty information
We recommend checking out our discussion threads on the Universal Audio Apollo 8p - Thunderbolt 2 Audio APOLLO 8P,
which address similar problems with connecting and setting up DSP Accelerators Universal Audio.
User manual for the Universal Audio Apollo 8p - Thunderbolt 2 Audio APOLLO 8P
The user manual for the Universal Audio Apollo 8p - Thunderbolt 2 Audio APOLLO 8P provides
necessary instructions for the proper use of the product Pro Audio - Computer Audio - DSP Accelerators.
The Apollo 8p from Universal Audio is a 16 x 20 Thunderbolt-ready computer audio interface with 8 professional quality microphone preamps. The Apollo 8p improves upon the original Apollo with better total harmonic distortion, dynamic range, and signal-to-noise specifications. Delivering the sound, feel and flow of analog recording, the interface combines high-resolution analog design with on-board UAD Processing, allowing music producers and performers to track audio through a range of classic UAD analog emulation plug-ins in real-time.
Designed to perform a central role in a modern Mac-based studio, the unit delivers 24-bit/192 kHz resolution, which ultimately translates into high-resolution analog audio. The interface features eight premium microphone preamps with Unison integration for UAD preamp and pedal plug-ins, which allows true-to-life performance including impedance matching, gain staging, and component-level circuit behaviors. Each mic pre features a switchable low cut filter, 48V phantom power, pad, polarity inversion, and stereo linking.
While the converters are open and transparent, the unit can quickly deliver a wide range of classic analog tones and color via its built-in UAD Processing. The on-board QUAD Core processing provides up to a sub-2 millisecond latency that allows for quickly monitoring, auditioning, and "printing" audio using classic analog emulations from Ampex, Lexicon, Manley, Neve, Roland, SSL, Studer, and more.
Apollo's Core Audio drivers ensure compatibility with all major DAWs, including Pro Tools, Logic Pro, Cubase, Live, and more. The included Console 2.0 application provides control and recall of all interface and UAD plug-in settings including channel strip presets, drag & drop functionality, and dynamically resizable windows.
The Apollo 8p offers a comprehensive monitor solution with dedicated front panel controls for Alt Speakers, Dim, and Mono functions, as well as input and output metering capabilities. A total of four Apollos and six total UAD-2 devices can be combined via the included Apollo Expanded software, allowing Thunderbolt users the ability to expand their I/O and DSP. The Apollo 8p ships with a power supply, IEC power cord, and four rack-mount screws.
If you own a Universal Audio dsp accelerators and have a user manual in electronic form,
you can upload it to this website using the link on the right side of the screen.
You can upload and download the manual for the Universal Audio Apollo 8p - Thunderbolt 2 Audio APOLLO 8P in the following formats:
*.pdf, *.doc, *.txt, *.jpg - Other formats are unfortunately not supported.
Additional parameters of the Universal Audio Apollo 8p - Thunderbolt 2 Audio APOLLO 8P:
Specifications
Computer Connection
2 x Thunderbolt 2 (Thunderbolt 1 compatible)
Converters
24-bit
Sample Rates
44.1, 48, 88.2, 96, 176.4 and 192 kHz
Analog Input
Microphone/Line: 8 x Combo XLR / 1/4"/6.35 mm 2 x 1/4" TS phone Hi-Z
Analog Output
6 x 1/4" TRS phone line 2 x 1/4" TRS phone monitor 2 x 1/4" TRS phone headphone
Digital Input/Output
S/PDIF Connector Type: (shared with ADAT) Optical TOSLINK JIS F05 Format: IEC958 Supported Sample Rates: 44.1, 48, 88.2, 96 kHz
ADAT Connector Type (shared with S/PDIF) Optical TOSLINK JIS F05 Format ADAT Digital Lightpipe with S/MUX Supported Sample Rates (kHz) 44.1, 48, 88.2, 96, 176.4, 192 Channel Assignments @ 44.1 kHz, 48 kHz Port 1 = Channels 1 - 8, Port 2 = 1 - 8 (mirrored) Channel Assignments @ 88.2 kHz, 96 kHz Port 1 = Channels 1 - 4, Port 2 = Channels 5 - 8 Channel Assignments @ 176.4 kHz, 192 kHz Port 1 = Channels 1 - 2, Port 2 = Channels 3 - 4
MIDI In/Out
No
Wordclock I/O
Connector Type: BNC Lock Range: ±0.5% of any supported sample rate Word Clock Input Termination: 75 Ohms, switchable Synchronization Sources: Internal, word clock, S/PDIF, ADAT
Microphone: -110 dBFS Hi-Z Inputs: -103 dBFS Line Inputs: -110 dBFS Line Outputs: -110 dBFS Monitor Out: -110 dBFS Headphone: -101 dB
Equivalent Input Noise
Microphone: -128.7 dB
Common Mode Rejection
Microphone: 70 dB (10' cable) Line Inputs: 60 dB (10' cable)
Input Impedance
Default Microphone Input Impedance: 5.4 kOhms (variable via Unison plug-ins) Hi-Z Input Impedance: 1 MOhms (variable via Unison plug-ins) Line Input Impedance: 10 kOhms
Output Impedance
Line Output Impedance: 100 ohms Monitor Output Impedance: 100 ohms
Gain Range
Microphone: +10 to +65 dB Hi-Z: +10 to +65 dB Line Input (1-8): +10 to +65 dB (Line Input Gain = ON)
Input Pad
Pad Attenuation: 20 dB (switchable per input)
Maximum Input/Output Level
Microphone Input Level: +25 dBu (minimum gain, pad engaged) Hi-Z Input Level: +12 dBu Line Input Level: +20.2 dBu Line/Monitor Output Level: +20.2 dBu Headphone Output Power: 160 mW into 300 ohm load
Stereo Level Balance
Line/Monitor Outputs (1-8): ±0.05 dB Monitor Outputs: ±0.01 dB
Power Requirements
Power Supplies: External AC to DC power supply, level V compliant AC Input Connector Type: IEC male AC Requirements: 100 to 240 VAC, 50/60 Hz DC Connector Type: XLR 4-Pin locking male (Neutrik P/N NC4MDM3-H) DC Requirements: 12 VDC, ±5% Maximum Power Consumption: 50 W
System Requirements
Thunderbolt Systems (UAD Powered Plug-Ins version 8)
Apple Mac computer with available Thunderbolt or Thunderbolt 2 port Mac OS X 10.8.5 Mountain Lion, 10.9.x Mavericks, or 10.10.x Yosemite 4 GB available disk space Internet connection to download software and authorize UAD plug-ins Compatible VST, Audio Units, RTAS, or AAX 64 plug-in host DAW software Thunderbolt cable (sold separately)
Specialties
Analog Round Trip Latency: 1.1 ms @ 96 kHz (including 4 serial UAD-2 plug-ins via Console application) S/MUX assignment allows for 8-channels @ 88.2/96 kHz and 4-channels @ 176.4/192 kHz 32/64-bit device drivers
The user manual for the Universal Audio Apollo 8p - Thunderbolt 2 Audio APOLLO 8P can be downloaded in .pdf
format if it did not come with your new dsp accelerators, although the seller is
required to supply one. It is also quite common that customers throw out
the user manual with the box, or put the CD away somewhere and then can’t find it.
That’s why we and other Universal Audio users keep a unique electronic library
for Universal Audio dsp acceleratorss,
where you can use our link to download the user manual for the Universal Audio Apollo 8p - Thunderbolt 2 Audio APOLLO 8P.
The user manual lists all of the functions of the Universal Audio Apollo 8p - Thunderbolt 2 Audio APOLLO 8P,
all the basic and advanced features and tells you how to use the dsp accelerators.
The manual also provides troubleshooting for common problems. Even greater
detail is provided by the service manual, which is not typically shipped with the product,
but which can often be downloaded from Universal Audio service.
If you want to help expand our database, you can upload a link to this website
to download a user manual or service manual, ideally in .pdf format. These pages
are created by you – users of the Universal Audio Apollo 8p - Thunderbolt 2 Audio APOLLO 8P. User manuals are also
available on the Universal Audio website under Pro Audio - Computer Audio - DSP Accelerators.
Question and answer discussion forum concerning user instructions and resolving problems with the Universal Audio Apollo 8p - Thunderbolt 2 Audio APOLLO 8P - no comments have been made yet - be the first to add a comment
Why is the blue light (wireless symbol)...what is it on...its a blue light. I have had these for years and have never had that light come on and it is not allowing me to print! What do I do to turn it off? ...K&M manual - K&M 200 Telescoping Microphone Stand (Black) 20000-500-55 Posted by: jpdaval69 2024-09-10 00:50:11
I need the service manual/schematic of Universal Audio Solo/610 Serial number: 2310 MfgDt: 0607.
I hope you have it and I'm willing to be charged for it.
Best Regards....True Dock not recognizing hard drives - Kingwin True Dock Super-Speed USB 3.0 to TD-2535U3 Posted by: bf1955 2024-08-22 15:34:26
True Dock is not recognizing HDD, the HDD light does not come on, even though the power light does come one....