|
User manual for Universal Audio Apollo Twin USB Desktop Interface APTWDUSB
- Manufacturer: Universal Audio
- Basic description and contents of package
- Product classification: Pro Audio - Computer Audio - Audio Interfaces & Systems
- Safety instructions
- Startup and operation of the audio interfaces & systems
- Tips for setting up your Universal Audio
- Settings and expert assistance
- Contact Universal Audio service
- Troubleshooting
- Warranty information
- Price: 899 USD
Click to enlarge image
|
We recommend checking out our discussion threads on the Universal Audio Apollo Twin USB Desktop Interface APTWDUSB,
which address similar problems with connecting and setting up Audio Interfaces & Systems Universal Audio.
|
User manual for the Universal Audio Apollo Twin USB Desktop Interface APTWDUSB
The user manual for the Universal Audio Apollo Twin USB Desktop Interface APTWDUSB provides
necessary instructions for the proper use of the product Pro Audio - Computer Audio - Audio Interfaces & Systems.
The Apollo Twin USB Desktop Interface with Realtime UAD Processing from Universal Audio is a USB 3.0 audio interface capable of capturing your audio in up to 24-bit/192 kHz with realtime, low-latency UAD plug-in processing. It features Universal Audio's Unison technology, which, in conjunction with their UAD plug-ins, is capable of emulating a range of tube and solid-state microphone preamps, including their impedance and gain-stage sweet spots.
The Apollo Twin USB includes the Realtime Analog Classics UAD plug-in bundle, featuring legacy editions of the LA-2A Classic Audio Leveler, the 1176LN Limiting Amplifier, and Pultec EQP-1A Program Equalizer, plus Softube Amp Room Essentials, and the 610-B Tube Preamp.
|
If you own a Universal Audio audio interfaces & systems and have a user manual in electronic form,
you can upload it to this website using the link on the right side of the screen.
You can upload and download the manual for the Universal Audio Apollo Twin USB Desktop Interface APTWDUSB in the following formats:
- *.pdf, *.doc, *.txt, *.jpg - Other formats are unfortunately not supported.
|
Additional parameters of the Universal Audio Apollo Twin USB Desktop Interface APTWDUSB:
| I/O | 2x Combo XLR/TRS mic/line inputs
1x 1/4" (6.3 mm) Hi-Z input
2x 1/4" (6.3 mm) TRS balanced line outputs (independent mix buses)
2x 1/4" (6.3 mm) TRS balanced (one stereo pair, independent L/R mix buses)
1x 1/4" (6.3 mm) TRS unbalanced stereo headphone output (independent L/R mix buses)
1x TOSLINK optical, ADAT or S/PDIF selectable digital input
1x USB 3.0 port | | Conversion | Supported Sample Rates: 44.1, 48, 88.2, 96, 176.4, 192 kHz
Bit-Depth per Sample: 24-bits
Simultaneous A/D Conversion: 2 channels
Simultaneous D/A Conversion: 6 channels
Analog Round-Trip Latency: 1.1 ms @ 96 kHz
Analog Round-Trip Latency with 4 Serial UAD Powered Plug-Ins via Console Application: 1.1 ms @ 96 kHz | | Line Inputs | Line Inputs 1 & 2:
Jack Type (combo mic/line balanced inputs): 1/4" (6.3 mm) female TRS balanced
Dynamic Range: 117.5 dB, A-weighted
Signal to Noise Ratio: 117.5 dB, A-weighted
Total Harmonic Distortion + Noise: -108 dBFS
CMRR: Greater than 60 dB (10' cable)
Frequency Response: 20 Hz to 20 kHz, ±0.1 dB
Input Impedance: 10 kOhms
Gain Range: +10 to +65 dB
Maximum Input Level (@ Minimum Gain): 18 dBV
Maximum Input Level (@ Maximum Gain): -37 dBV
Stereo Level Balance: ±0.05 dB | | Microphone Inputs | Microphone Inputs 1 & 2:
Jack Type (combo mic/line balanced inputs): Female XLR balanced (pin 2 positive)
Phantom Power: +48 V, switchable per input
Dynamic Range: 118 dB, A-weighted
Signal to Noise Ratio: 118 dB, A-weighted
Total Harmonic Distortion + Noise: -110 dBFS
Equivalent Input Noise: -127 dB
Frequency Response: 20 Hz to 20 kHz, ±0.1 dB
CMRR: Greater than 70 dB (10' cable)
Default Input Impedance: 5.4 kOhms (variable via Unison preamp model)
Gain Range: +10 to +65 dB
Pad Attenuation: 20 dB (variable via Unison preamp model), switchable per input
Maximum Input Level (@ Minimum Gain, with Pad): 23.8 dBV
Maximum Input Level (@ Maximum Gain, with Pad): -31.2 dBV | | Hi-Z Input | Jack Type: 1/4" (6.3 mm) female TS unbalanced
Dynamic Range: 117 dB, A-weighted
Signal-to-Noise Ratio: 117 dB, A-weighted
Total Harmonic Distortion + Noise: -101 dBFS
Frequency Response: 20 Hz to 20 kHz, ±0.1 dB
Input Impedance: 1 MOhms
Maximum Input Level (@ Minimum Gain): 10 dBV
Maximum Input Level (@ Maximum Gain): -45 dBV | | Line Outputs | Line Outputs 3 & 4:
Jack Type: 1/4" (6.3 mm) female TRS balanced
Dynamic Range: 118 dB, A-weighted
Signal-to-Noise Ratio: 118 dB, A-weighted
Total Harmonic Distortion + Noise: -107 dBFS
Frequency Response: 20 Hz to 20 kHz, ±0.1 dB
Stereo Level Balance: ±0.05 dB
Channel Separation: Greater than 120 dB
Output Impedance: 600 ohms
Maximum Output Level: 18 dBV | | Monitor Outputs | Monitor Outputs 1 & 2:
Jack Type: 1/4" (6.3 mm) female TRS balanced
Frequency Response: 20 Hz to 20 kHz, ±0.1 dB
Dynamic Range: 115 dB, A-weighted
Signal-to-Noise Ratio: 115 dB, A-weighted
Total Harmonic Distortion + Noise: -105 dBFS
Channel Separation: Greater than 118 dB
Stereo Level Balance: ±0.05 dB
Output Impedance: 600 ohms
Output Gain Range: -96 to 0 dB
Maximum Output Level: 18 dBV
Operating Reference Level: +14 dBu, +20 dBu (selectable) | | Headphone Output | Stereo Headphone Output:
Jack Type: 1/4" (6.3 mm) female TRS stereo, unbalanced
Frequency Response: 20 Hz to 20 kHz, ±0.1 dB
Dynamic Range: 113 dB, A-weighted
Signal-to-Noise Ratio: 113 dB, A-weighted
Channel Separation: Greater than 110 dB
Total Harmonic Distortion + Noise: -101 dBFS
Stereo Level Balance: ±0.11 dB
Output Impedance: 10 ohms
Output Gain Range: INF to 0 dB
Maximum Output Power: 80 mW into 600 ohms | | S/PDIF | Connector Type: Optical TOSLINK JIS F05 (shared with ADAT)
Format: IEC958
Supported Sample Rates: 44.1, 48, 88.2, 96 kHz
S/PDIF Input Channels: 2 (stereo L/R) | | ADAT | Connector Type: Optical TOSLINK JIS F05 (shared with S/PDIF)
Format: ADAT Digital Lightpipe with S/MUX
Supported Sample Rates: 44.1, 48, 88.2, 96, 172.4, 192 kHz
ADAT Input Channels @ 44.1, 48 kHz: 1 to 8
ADAT Input Channels @ 88.2, 96 kHz: 1 to 4 (S/MUX)
ADAT Input Channels @ 176.4, 192 kHz: 1 to 2 (S/MUX_ | | Clock Sources | Internal, S/PDIF, ADAT (digital clock sync source conditional per selected digital input type) | | Power Supply | External AC to DC | | Connector Type | AC: Changeable blades (UL, VDE, UK, SSA, CCC)
DC: Male plug, 2.1 mm x 5.5 mm, center positive | | Power Requirements | AC: 100~240 VAC, 50/60 Hz
DC: 12 VDC, ±5% | | Maximum Power Consumption | 12 W | | Operating Temperature | 32 to 95ºF (0 to 35ºC) | | Storage Temperature | -40 to 176ºF (-40 to 80ºC) | | Operating Humidity | 20 to 80% | | System Requirements | PC with available USB 3.0 port
Windows 7 or Windows 8.1, 64-bit edition
Intel Core i3, Core i5, Core i7, or Xeon processor
6 GB available disk space
Host software that supports VST, RTAS, or AAX 64 plug-in host formats
Internet connection to download software and authorize UAD plug-ins | | Dimensions (W x H x D) | 6.31 x 2.60 x 5.86" (160.2 x 66.0 x 148.8 mm)
Depth, Chassis Only: 5.86" (148.8 mm)
Depth, Including Knob & Jack Protrusions: 6.20" (157.5 mm) | | Weight | 2.35 lb (1.06 kg) | | Package Weight | 4.35 lb | | Box Dimensions (LxWxH) | 7.9 x 7.8 x 5.5" | |
The user manual for the Universal Audio Apollo Twin USB Desktop Interface APTWDUSB can be downloaded in .pdf
format if it did not come with your new audio interfaces & systems, although the seller is
required to supply one. It is also quite common that customers throw out
the user manual with the box, or put the CD away somewhere and then can’t find it.
That’s why we and other Universal Audio users keep a unique electronic library
for Universal Audio audio interfaces & systemss,
where you can use our link to download the user manual for the Universal Audio Apollo Twin USB Desktop Interface APTWDUSB.
The user manual lists all of the functions of the Universal Audio Apollo Twin USB Desktop Interface APTWDUSB,
all the basic and advanced features and tells you how to use the audio interfaces & systems.
The manual also provides troubleshooting for common problems. Even greater
detail is provided by the service manual, which is not typically shipped with the product,
but which can often be downloaded from Universal Audio service.
If you want to help expand our database, you can upload a link to this website
to download a user manual or service manual, ideally in .pdf format. These pages
are created by you – users of the Universal Audio Apollo Twin USB Desktop Interface APTWDUSB. User manuals are also
available on the Universal Audio website under Pro Audio - Computer Audio - Audio Interfaces & Systems.
Question and answer discussion forum concerning user instructions and resolving problems with the Universal Audio Apollo Twin USB Desktop Interface APTWDUSB - no comments have been made yet - be the first to add a comment
Post new comment/question/response regarding the Universal Audio Apollo Twin USB Desktop Interface APTWDUSB
|
|
|
|
|
