|
User manual for Williams Sound WIRSYS1 - Two-Channel Sound Plus IR WIR SYS 1
- Manufacturer: Williams Sound
- Basic description and contents of package
- Product classification: A/V Presentation - Assistive Listening - Assistive Listening Systems
- Safety instructions
- Startup and operation of the assistive listening systems
- Tips for setting up your Williams Sound
- Settings and expert assistance
- Contact Williams Sound service
- Troubleshooting
- Warranty information
|
We recommend checking out our discussion threads on the Williams Sound WIRSYS1 - Two-Channel Sound Plus IR WIR SYS 1,
which address similar problems with connecting and setting up Assistive Listening Systems Williams Sound.
|
User manual for the Williams Sound WIRSYS1 - Two-Channel Sound Plus IR WIR SYS 1
The user manual for the Williams Sound WIRSYS1 - Two-Channel Sound Plus IR WIR SYS 1 provides
necessary instructions for the proper use of the product A/V Presentation - Assistive Listening - Assistive Listening Systems.
The WIRSYS1 from Williams Sound is a two-channel wireless listening system ideal for use in courtrooms. The system consists of a MOD232 infra-red modulator, a WIRTX9 infra-red emitter, and four WIRRX12-4N bodypack receivers.
The MOD232 modulator can accept two mic or line-level audio inputs simultaneously via the XLR/TRS combo input jacks. It uses a Baseband cable connection to transmit the audio over one of four selectable frequencies to the WIRTX9 emitter. The modulator also has RCA line outputs for connecting to monitors or recorders. Additional modulators may be daisy-chained as well.
The emitter receives the audio signals and divides its power equally among them. In the case of this system, two channels will be received and sent to a coverage area of approximately 18,000 square feet. If an additional modulator (sold separately) were connected, the emitter would receive four channels, and a coverage area of approximately 11,000 feet could be maintained. The emitter is wall or ceiling-mounted, and sends the audio from the modulator to the WIRRX12-4N receivers.
The receivers are compact bodypacks that are easily held or worn around the neck on a lanyard. They offer a four-way channel selector to match the frequency of the other system components, and a large, easy-to-use volume control. The standard 3.5mm headphone jack accepts the included fold-flat headphones as well as the included neckloop, which accommodates a user with a T-coil-equipped hearing aid. The receivers each operate for up to 60 hours on standard AA batteries.
|
If you own a Williams Sound assistive listening systems and have a user manual in electronic form,
you can upload it to this website using the link on the right side of the screen.
You can upload and download the manual for the Williams Sound WIRSYS1 - Two-Channel Sound Plus IR WIR SYS 1 in the following formats:
- *.pdf, *.doc, *.txt, *.jpg - Other formats are unfortunately not supported.
|
Additional parameters of the Williams Sound WIRSYS1 - Two-Channel Sound Plus IR WIR SYS 1:
Modulation | FM Wideband, +50kHz Deviation, 50µS Pre-Emphasis | Carrier Frequency | Selectable, 2.3/2.8/3.3/3.8MHz (Channel A, Channel B) | Signal to Noise Ratio | More than 60dB | Frequency Response | 30Hz - 16kHz, +1, -3dB | Total Harmonic Distortion (THD) | Less than 2% | Connectors | 1 x Power Input 1 x 1/4" TRS Headphone Output 2 x XLR/TRS Combo Input Jacks 2 x Line-Level RCA Phono Outputs 1 x BNC Baseband Input 2 x BNC Baseband Outputs | Power | 24VAC, 50-60Hz, 15VA | Dimensions (WxDxH) | 8.5 x 8.2 x 1.7" (215 x 208 x 44mm) | Weight | 3.1 lbs (1.5kg) | Carrier Frequency | 50kHz - 8MHz | Emitter IR Power | 3.5W | Coverage Area | 28,000 Square Feet (Single-Channel Mode with RX12-4 Receiver) 11,000 Square Feet (Four-Channel Mode with RX12-4 Receiver) 3500 Square Feet (Single-Channel Mode with RX14-2 Receiver) 3063 Square Feet (Single-Channel Mode with RX16 Receiver) | Connectors | 1 x BNC Baseband Input 1 x BNC Baseband Output 1 x Power Input | Power | 24VAC, 50-60Hz, 35VA | Dimensions (WxHxD) | 11.25 x 6.25 x 2.1" (286 x 159 x 54mm) | Weight | 1.9 lbs (0.9kg) | Carrier Frequency | 2.3/2.8/3.3/3.8MHz (Selectable) | Operating Range | Up to 28,000 Square Feet when used with a Single WIRTX9 Emitter in Single-Channel Mode | De-Emphasis | 50µS | Deviation | ±50kHz | Signal to Noise Ratio | 60dB Min. | Squelch | Squelch @ 40dB S/N Ratio | Frequency Response | 25Hz - 16kHz, +1, -3dB | Total Harmonic Distortion (THD) | Less than 1% | Connectors | 1 x 3.5mm Stereo Headphone Jack | Battery | 2 x AA, Alkaline or NiMH Life: Up to 60 Hours Alkaline, Up to 30 Hours NiMH | Dimensions (LxWxH) | 3.6 x 2.4 x 0.9" (92 x 60 x 22mm) | Weight | 4.5 oz (127g) (With Batteries) | Package Weight | 19.02 lb | Box Dimensions (LxWxH) | 16.0 x 12.0 x 12.0" | |
The user manual for the Williams Sound WIRSYS1 - Two-Channel Sound Plus IR WIR SYS 1 can be downloaded in .pdf
format if it did not come with your new assistive listening systems, although the seller is
required to supply one. It is also quite common that customers throw out
the user manual with the box, or put the CD away somewhere and then can’t find it.
That’s why we and other Williams Sound users keep a unique electronic library
for Williams Sound assistive listening systemss,
where you can use our link to download the user manual for the Williams Sound WIRSYS1 - Two-Channel Sound Plus IR WIR SYS 1.
The user manual lists all of the functions of the Williams Sound WIRSYS1 - Two-Channel Sound Plus IR WIR SYS 1,
all the basic and advanced features and tells you how to use the assistive listening systems.
The manual also provides troubleshooting for common problems. Even greater
detail is provided by the service manual, which is not typically shipped with the product,
but which can often be downloaded from Williams Sound service.
If you want to help expand our database, you can upload a link to this website
to download a user manual or service manual, ideally in .pdf format. These pages
are created by you – users of the Williams Sound WIRSYS1 - Two-Channel Sound Plus IR WIR SYS 1. User manuals are also
available on the Williams Sound website under A/V Presentation - Assistive Listening - Assistive Listening Systems.
Question and answer discussion forum concerning user instructions and resolving problems with the Williams Sound WIRSYS1 - Two-Channel Sound Plus IR WIR SYS 1 - no comments have been made yet - be the first to add a comment
Post new comment/question/response regarding the Williams Sound WIRSYS1 - Two-Channel Sound Plus IR WIR SYS 1
|
|
|
|
|