|
User manual for Cisco WS-C2960X-48TS-L Catalyst 2960-X 48-Port WS-C2960X-48TS-L
- Manufacturer: Cisco
- Basic description and contents of package
- Product classification: Computers & Solutions - Networking - Network Switches, Bridges & Hubs
- Safety instructions
- Startup and operation of the network switches, bridges & hubs
- Tips for setting up your Cisco
- Settings and expert assistance
- Contact Cisco service
- Troubleshooting
- Warranty information
|
We recommend checking out our discussion threads on the Cisco WS-C2960X-48TS-L Catalyst 2960-X 48-Port WS-C2960X-48TS-L,
which address similar problems with connecting and setting up Network Switches, Bridges & Hubs Cisco.
|
User manual for the Cisco WS-C2960X-48TS-L Catalyst 2960-X 48-Port WS-C2960X-48TS-L
The user manual for the Cisco WS-C2960X-48TS-L Catalyst 2960-X 48-Port WS-C2960X-48TS-L provides
necessary instructions for the proper use of the product Computers & Solutions - Networking - Network Switches, Bridges & Hubs.
The WS-C2960X-48TS-L Catalyst 2960-X 48-Port Gigabit Ethernet Switch from Cisco is a feature-packed, 48-port Gigabit Ethernet switch for your network. The switch is equipped with APM86392 600 MHz dual-core CPU, and provides a forwarding rate of 107.1 Mb/s (64-byte L3 packets). This switch has a fixed-configuration, and is a stackable Gigabit Ethernet switch that provides enterprise-class access for campus and branch applications. Designed for operational simplicity to lower total cost of ownership, it enables scalable, secure, and energy-efficient business operations with intelligent services and a range of advanced Cisco IOS software features. This switch comes with one fixed power-supply.
|
If you own a Cisco network switches, bridges & hubs and have a user manual in electronic form,
you can upload it to this website using the link on the right side of the screen.
You can upload and download the manual for the Cisco WS-C2960X-48TS-L Catalyst 2960-X 48-Port WS-C2960X-48TS-L in the following formats:
- *.pdf, *.doc, *.txt, *.jpg - Other formats are unfortunately not supported.
|
Additional parameters of the Cisco WS-C2960X-48TS-L Catalyst 2960-X 48-Port WS-C2960X-48TS-L:
CPU | APM86392 600 MHz dual-core | Flash Memory | 128 MB | DRAM | 512 MB | Console Ports | USB (type-B) Ethernet (RJ-45) | Storage Interface | USB (type-A) for external flash storage | Network Management | 10/100 Mb/s Ethernet (RJ-45) | Ports | 48 x 10/100/1000 Mb/s Ethernet | Uplink Interfaces | 4 x SFP | Forwarding Rate | 107.1 Mp/s (64-byte L3 packets) | Forwarding Bandwidth | 108 Gb/s | Switching Bandwidth | 216 Gb/s | VLANs | Active: 1023 | VLAN IDs | Available: 4096 | Maximum Transmission Unit | 9198 bytes (L3 packets) | Jumbo Frame | 9216 bytes | Cisco IOS Software Feature Set | LAN base | Management | Bridge-MIB Cisco-Cable-Diag-MIB Cisco-CDP-MIB Cisco-Cluster-MIB Cisco-Config-Copy-MIB Cisco-Config-Man-MIB Cisco-DHCP-Snooping-MIB Cisco-Entity-Vendortype-OID-MIB Cisco-Envmon-MIB Cisco-ERR-Disable-MIB Cisco-Flash-MIB Cisco-FTP-Client-MIB Cisco-Igmp-Filter-MIB Cisco-Image-MIB Cisco-IP-Stat-MIB Cisco-Lag-MIB Cisco-Mac-Notification-MIB Cisco-Memory-Pool-MIB Cisco-Pagp-MIB Cisco-Ping-MIB Cisco-PoE-Extensions-MIB Cisco-Port-QoS-MIB Cisco-Port-Security-MIB Cisco-Port-Storm-Control-MIB Cisco-Products-MIB Cisco-Process-MIB Cisco-Rttmon-MIB Cisco-SMI-MIB Cisco-STP-Extensions-MIB Cisco-Syslog-MIB Cisco-TC-MIB Cicso-TCP-MIB Cisco-Udldp-MIB Cisco-Vlan-Iftable Relationship-MIB Cisco-VLAN-Membership-MIB Cisco-VTP-MIB Entity-MIB Etherlike-MIB IEEE8021-PAE-MIB IEEE8023-LAG-MIB IF-MIB Inet-Address-MIB OLD-Cisco-Chassis-MIB OLD-Cisco-Flash-MIB OLD-Cisco-Interfaces-MIB OLD-Cisco-IP-MIB OLD-Cisco-SYS-MIB OLD-Cisco-TCP-MIB OLD-Cisco-TS-MIB RFC1213-MIB RMON-MIB RMON2-MIB SNMP-Framework-MIB SNMP-MPD-MIB SNMP-Notification-MIB SNMP-Target-MIB SNMPv2-MIB TCP-MIB UDP-MIB ePM MIB | Standards | IEEE 802.1D spanning tree protocol IEEE 802.1p CoS prioritization IEEE 802.1Q VLAN IEEE 802.1s IEEE 802.1w IEEE 802.1X IEEE 802.1ab (LLDP) IEEE 802.3ad IEEE 802.3af and IEEE 802.3at IEEE 802.3ah (100BASE-X single/multimode fiber only) IEEE 802.3x full duplex on 10BASE-T, 100BASE-TX, and 1000BASE-T ports IEEE 802.3 10BASE-T IEEE 802.3u 100BASE-TX IEEE 802.3ab 1000BASE-T IEEE 802.3z 1000BASE-X RMON I and II standards SNMP v1, v2c, and v3 IEEE 802.3az IEEE 802.3ae 10 Gigabit Ethernet IEEE 802.1ax | RFC | RFC 768 - UDP RFC 783 - TFTP RFC 791 - IP RFC 792 - ICMP RFC 793 - TCP RFC 826 - ARP RFC 854 - telnet RFC 951 - bootstrap protocol (BOOTP) RFC 959 - FTP RFC 1112 - IP multicast and IGMP RFC 1157 - SNMP v1 RFC 1166 - IP addresses RFC 1256 - Internet control message protocol (ICMP) router discovery RFC 1305 - NTP RFC 1492 - TACACS+ RFC 1493 - bridge MIB RFC 1542 - Boot-up extensions RFC 1643 - Ethernet interface MIB RFC 1757 - RMON RFC 1901 - SNMP v2C RFC 1902-1907 - SNMP v2 RFC 1981 - Maximum Transmission Unit (MTU) path discovery IPv6 FRC 2068 - HTTP RFC 2131 - DHCP RFC 2138 - RADIUS RFC 2233 - IF MIB v3 RFC 2373 - IPv6 aggregately address RFC 2460 - IPv6 RFC 2461 - IPv6 neighbor discovery RFC 2462 - IPv6 auto-configuration RFC 2463 - ICMP IPv6 RFC 2474 - differentiated services (DiffServ) precedence RFC 2597 - assured forwarding RFC 2598 - expedited forwarding RFC 2571 - SNMP management RFC 3046 - DHCP relay agent information option RFC 3376 - IGMP v3 RFC 3580 - 802.1X Radius | Power Consumption | 0% Traffic: 34.9 W 10% Traffic: 49.5 W 100% Traffic: 49.7 W Weighted Average: 49.5 W | Input Voltage | 100 to 240 VAC, 50 to 60 Hz DC RPS Input: 12 V: 5 A | Input Current | 9 to 4 A | Power Rating | 0.051 kVA (switch maximum consumption values) | Safety | UL 60950-1 second edition CAN/CSA-C22.2 No. 60950-1 second edition EN 60950-1 second edition IEC 60950-1 second edition AS/NZS 60950-1 | EMC | Emissions: 47CFR Part 15 (CFR 47) Class A AS/NZS CISPR22 Class A CISPR22 Class A EN55022 Class A ICES003 Class A VCCI Class A EN61000-3-2 EN61000-3-3 KN22 Class A CNS13438 Class A
Immunity: EN55024 CISPR24 EN300386 KN24 | Telco | Common Language Equipment Identifier (CLEI) code | Environmental | Reduction of Hazardous Substances (RoHS) including Directive 2011/65/EU | Certifications | US Government: USGv6 and IPv6 ready logo | MTBF | 4,42,690 hours | Sound Pressure | LpA: 42 dB (typical) LpAD: 46 dB (maximum) | Sound Power | LwA: 5.1 B LwAD: 5.5 B | Operating Temperature | Up to 5000' (1500 m): 23 to 113°F (-5 to 45°C) Up to 10,000' (3000 m): 23 to 104°F (-5 to 40°C) Short-Term Exception at Sea Level: 23 to 131°F (-5 to 55°C) Short-Term Exception up to 5000' (1500 m): 23 to 122°F (-5 to 50°C) Short-Term Exception up to 10,000' (3000 m): 23 to 113°F (-5 to 45°C) Short-Term Exception up to 13,000' (4000 m): 23 to 104°F (-5 to 40°C) | Storage Temperature | Up to 15,000' (4573 m): -13 to 158°F (-25 to 70°C) | Operating Altitude | Up to 10,000' (3000 m) | Storage Altitude | Up to 13,000' (4000 m) | Operating Relative Humidity Range | 10 to 95% (non-condensing) | Storage Relative Humidity | 10 to 95% (non-condensing) | Dimensions (W x H x D) | 17.50 x 1.75 x 11.00" (44.50 x 4.50 x 27.90 cm) | Weight | 9.4 lb (4.2 kg) | |
The user manual for the Cisco WS-C2960X-48TS-L Catalyst 2960-X 48-Port WS-C2960X-48TS-L can be downloaded in .pdf
format if it did not come with your new network switches, bridges & hubs, although the seller is
required to supply one. It is also quite common that customers throw out
the user manual with the box, or put the CD away somewhere and then can’t find it.
That’s why we and other Cisco users keep a unique electronic library
for Cisco network switches, bridges & hubss,
where you can use our link to download the user manual for the Cisco WS-C2960X-48TS-L Catalyst 2960-X 48-Port WS-C2960X-48TS-L.
The user manual lists all of the functions of the Cisco WS-C2960X-48TS-L Catalyst 2960-X 48-Port WS-C2960X-48TS-L,
all the basic and advanced features and tells you how to use the network switches, bridges & hubs.
The manual also provides troubleshooting for common problems. Even greater
detail is provided by the service manual, which is not typically shipped with the product,
but which can often be downloaded from Cisco service.
If you want to help expand our database, you can upload a link to this website
to download a user manual or service manual, ideally in .pdf format. These pages
are created by you – users of the Cisco WS-C2960X-48TS-L Catalyst 2960-X 48-Port WS-C2960X-48TS-L. User manuals are also
available on the Cisco website under Computers & Solutions - Networking - Network Switches, Bridges & Hubs.
Question and answer discussion forum concerning user instructions and resolving problems with the Cisco WS-C2960X-48TS-L Catalyst 2960-X 48-Port WS-C2960X-48TS-L - no comments have been made yet - be the first to add a comment
Post new comment/question/response regarding the Cisco WS-C2960X-48TS-L Catalyst 2960-X 48-Port WS-C2960X-48TS-L
|
|
|
|
|