|
User manual for Pelco DD436 Spectra IV SE Dome Drive (NTSC) DD436
- Manufacturer: Pelco
- Basic description and contents of package
- Product classification: Surveillance - Surveillance Video - Additional Accessories - Interface Modules
- Safety instructions
- Startup and operation of the interface modules
- Tips for setting up your Pelco
- Settings and expert assistance
- Contact Pelco service
- Troubleshooting
- Warranty information
|
We recommend checking out our discussion threads on the Pelco DD436 Spectra IV SE Dome Drive (NTSC) DD436,
which address similar problems with connecting and setting up Interface Modules Pelco.
|
User manual for the Pelco DD436 Spectra IV SE Dome Drive (NTSC) DD436
The user manual for the Pelco DD436 Spectra IV SE Dome Drive (NTSC) DD436 provides
necessary instructions for the proper use of the product Surveillance - Surveillance Video - Additional Accessories - Interface Modules.
The Pelco DD436 Spectra IV SE Dome Drive in the Spectra IV SE Series Dome System helps produce high quality video in the most difficult environments. All cameras in Spectra IV SE dome drives feature LowLight technology allowing the cameras to compensate for scenes where minimal light is present. Both the 36x cameras feature built-in motion detection and advanced 128x WDR that enables the system to compensate for scenes where dramatic contrasts in lighting are present. The 36x day/night camera electronic image stabilization digitally reduces blurring of the camera image due to vibration caused by external sources, such as wind and traffic. Auto sharpness enhances picture detail by increasing the aperture gain of the camera and sharpening the edges in the picture.
|
If you own a Pelco interface modules and have a user manual in electronic form,
you can upload it to this website using the link on the right side of the screen.
You can upload and download the manual for the Pelco DD436 Spectra IV SE Dome Drive (NTSC) DD436 in the following formats:
- *.pdf, *.doc, *.txt, *.jpg - Other formats are unfortunately not supported.
|
Additional parameters of the Pelco DD436 Spectra IV SE Dome Drive (NTSC) DD436:
Signal Format | NTSC | Scanning System | 2:1 interlace / 1:1 progressive scan (user selectable) | Image Sensor | 1/4" EXview HAD | Effective Pixels (H x V) | 768 x 494 | Horizontal Resolution | >540 TVL | Lens | f/1.4 (focal length, 3.3 to 119 mm) | Zoom | 36x optical, 12x digital | Zoom Speed | Optical range: 3.2/4.6/6.6 seconds | Angle of View | Horizontal: 57.2° at 3.3 mm wide zoom; 1.7° at 119 mm telephoto zoom | Focus | Automatic with manual override | Sensitivity | Maximum at 35 IRE 0.55 lux at 1/60 sec (color) 0.018 lux at 1/2 sec (color) 0.00018 lux at 1/2 sec (B&W) | Sync System | Internal/AC line lock, phase adjustable using remote control, V-Sync | White Balance | Automatic with manual override | Shutter Speed | Automatic (electronic iris) / Manual 1/2 to 1/30,000 | Iris Control | Automatic iris control with manual override | Gain Control | Automatic / Off | Video Output | 1 Vpp, 75Ω | Video Signal | To Noise >50 dB | Wide Dynamic Range | 128x | Pan Movement | 360° continuous pan rotation | Vertical Tilt | Unobstructed 2 to -92° | Manual Pan/Tilt Speeds | Pan: 0.1 to 80°/sec manual operation, 150°/sec Turbo Tilt: 0.1 to 40°/sec manual operation | Preset Speeds | Pan: 400°/sec Tilt 200°/sec For variable-speed operation, an appropriate controller is required (with nonvariable speed control, Spectra IV SE pan/tilt speed is 20°/sec) | Input Voltage | 18 to 32 VAC; 24 VAC nominal 22 to 27 VDC; 24 VDC nominal | Input Power | 24 VAC 23 VA nominal (without heater); 73 VA nominal (with heater) 24 VDC 0.7 A nominal (without heater); 3 A nominal (with heater) | Fuse | 1.25 A | Auxiliary Output | 2 | Auxiliary Input | 7 | Package Weight | 4.2 lb | Box Dimensions (LxWxH) | 10.315 x 9.764 x 9.685" | |
The user manual for the Pelco DD436 Spectra IV SE Dome Drive (NTSC) DD436 can be downloaded in .pdf
format if it did not come with your new interface modules, although the seller is
required to supply one. It is also quite common that customers throw out
the user manual with the box, or put the CD away somewhere and then can’t find it.
That’s why we and other Pelco users keep a unique electronic library
for Pelco interface moduless,
where you can use our link to download the user manual for the Pelco DD436 Spectra IV SE Dome Drive (NTSC) DD436.
The user manual lists all of the functions of the Pelco DD436 Spectra IV SE Dome Drive (NTSC) DD436,
all the basic and advanced features and tells you how to use the interface modules.
The manual also provides troubleshooting for common problems. Even greater
detail is provided by the service manual, which is not typically shipped with the product,
but which can often be downloaded from Pelco service.
If you want to help expand our database, you can upload a link to this website
to download a user manual or service manual, ideally in .pdf format. These pages
are created by you – users of the Pelco DD436 Spectra IV SE Dome Drive (NTSC) DD436. User manuals are also
available on the Pelco website under Surveillance - Surveillance Video - Additional Accessories - Interface Modules.
Question and answer discussion forum concerning user instructions and resolving problems with the Pelco DD436 Spectra IV SE Dome Drive (NTSC) DD436 - no comments have been made yet - be the first to add a comment
Post new comment/question/response regarding the Pelco DD436 Spectra IV SE Dome Drive (NTSC) DD436
|
|
|
|
|