We recommend checking out our discussion threads on the Trijicon ACOG 4x32 Illuminated BDC Reticle TA31-D-100323,
which address similar problems with connecting and setting up Riflescopes Trijicon.
User manual for the Trijicon ACOG 4x32 Illuminated BDC Reticle TA31-D-100323
The user manual for the Trijicon ACOG 4x32 Illuminated BDC Reticle TA31-D-100323 provides
necessary instructions for the proper use of the product Optics - Riflescopes & Sights - Riflescopes.
Trijicon's flagship product, the Advanced Combat Optical Gunsight, or ACOG is built around two fundamental concepts: amalgamating the best elements of magnified optical scopes and red dot sights in a single unit; second, employing the Bindon Aiming Concept (BAC), the method of using both eyes open to aim with a magnified optic. This OD Green 4x32 Riflescope with Dual Illuminated Red Chevron Reticle is the result of these concepts; however, its features don't end here. Crystal clear glass, ultra-rugged body, battery-free illumination, and a precisely calculated, cartridge specific BDC reticle are standard characteristics of the ACOG.
If you own a Trijicon riflescopes and have a user manual in electronic form,
you can upload it to this website using the link on the right side of the screen.
You can upload and download the manual for the Trijicon ACOG 4x32 Illuminated BDC Reticle TA31-D-100323 in the following formats:
*.pdf, *.doc, *.txt, *.jpg - Other formats are unfortunately not supported.
Additional parameters of the Trijicon ACOG 4x32 Illuminated BDC Reticle TA31-D-100323:
Specifications
Magnification
4.0x
Objective Lens Diameter
32 mm
Eye Relief
1.5" (38 mm)
Exit Pupil
8 mm
Reticle
Dual illuminated, self-adjusting Red Chevron Reticle
Field of View
36.6' @ 100 yd (12.2 m @ 100 m)
Angle of View
7°
Impact Point Correction
1/2 MOA per click
Mount
Removable TA51 Picatinny-Type Integral AR carry handle mount
Finish
OD Green
Dimensions
5.8 x 2.3 x 2" (15 x 6 x 5 cm)
Weight
15 oz (424 g)
The user manual for the Trijicon ACOG 4x32 Illuminated BDC Reticle TA31-D-100323 can be downloaded in .pdf
format if it did not come with your new riflescopes, although the seller is
required to supply one. It is also quite common that customers throw out
the user manual with the box, or put the CD away somewhere and then can’t find it.
That’s why we and other Trijicon users keep a unique electronic library
for Trijicon riflescopess,
where you can use our link to download the user manual for the Trijicon ACOG 4x32 Illuminated BDC Reticle TA31-D-100323.
The user manual lists all of the functions of the Trijicon ACOG 4x32 Illuminated BDC Reticle TA31-D-100323,
all the basic and advanced features and tells you how to use the riflescopes.
The manual also provides troubleshooting for common problems. Even greater
detail is provided by the service manual, which is not typically shipped with the product,
but which can often be downloaded from Trijicon service.
If you want to help expand our database, you can upload a link to this website
to download a user manual or service manual, ideally in .pdf format. These pages
are created by you – users of the Trijicon ACOG 4x32 Illuminated BDC Reticle TA31-D-100323. User manuals are also
available on the Trijicon website under Optics - Riflescopes & Sights - Riflescopes.
Question and answer discussion forum concerning user instructions and resolving problems with the Trijicon ACOG 4x32 Illuminated BDC Reticle TA31-D-100323 - no comments have been made yet - be the first to add a comment
I have some Atlas AA120's that work but the power LED does not glow. There is only 1.5VDC on the LED and if I give it 3V it lights nicely.
There are two limiting resistors in parallel feeding the LED and about 23V feeding them. They (together) measu...Wiring/configure 501n-3 for rear view switch - Rear View Safety RVS-501N 3-Channel Multiplexer RVS-501N Posted by: Ron Diller 2025-05-06 23:25:57
Hello,I replaced the rv radio, which controls back,and turn signal cameras. How can I wire it to have the backup camera on all the time as a rear view mirror function, except when blinkers are on. Thanks! ...Wiring/configure 501n-3 for rear view switch - Rear View Safety RVS-501N 3-Channel Multiplexer RVS-501N Posted by: Ron Diller 2025-05-06 23:25:03
Hello,I replaced the rv radio, which controls back,and turn signal cameras. How can I wire it to have the backup camera on all the time as a rear view mirror function, except when blinkers are on. Thanks! ...
Question and answer discussion forum concerning user instructions and resolving problems with the Trijicon ACOG 4x32 Illuminated BDC Reticle TA31-D-100323 - no comments have been made yet - be the first to add a comment